參數資料
型號: TEA1099H
廠商: NXP SEMICONDUCTORS
元件分類: 無繩電話/電話
英文描述: Speech and handsfree IC with auxiliary inputs/outputs and analog multiplexer
中文描述: TELEPHONE SPEECH CKT, PQFP44
封裝: 10 X 10 MM, 1.75 MM HEIGHT, PLASTIC, QFP-44
文件頁數: 12/40頁
文件大小: 185K
代理商: TEA1099H
1999 Apr 08
12
Philips Semiconductors
Product specification
Speech and handsfree IC with auxiliary
inputs/outputs and analog multiplexer
TEA1099H
Handsfree application
As can be seen from Fig.3, a loop is formed via the
sidetone network in the line interface part and the acoustic
coupling between loudspeaker and microphone of the
handsfree part. When this loop gain is greater than 1,
howling occurs. In a full duplex application, this would be
the case. The loop-gain has to be much lower than 1 and
therefore has to be decreased to avoid howling. This is
achieved by the duplex controller. The duplex controller of
the TEA1099H detects which channel has the ‘largest’
signal and then controls the gain of the microphone
amplifier and the loudspeaker amplifier so that the sum of
the gains remains constant.
As a result, the circuit in this handsfree application can be
in three stable modes:
1.
Transmit mode (TX mode).
The gain of the microphone amplifier is at its maximum
and the gain of the loudspeaker amplifier is at its
minimum.
2.
Receive mode (RX mode).
The gain of the loudspeaker amplifier is at its
maximum and the gain of the microphone amplifier is
at its minimum.
3.
Idle mode.
The gain of the amplifiers is halfway between their
maximum and minimum value.
The difference between the maximum gain and minimum
gain is called the switching range.
H
ANDSFREE MICROPHONE CHANNEL
:
PINS
TXIN, GATX,
TXOUT
AND
GNDTX (see Fig.7)
The TEA1099H has an asymmetrical handsfree
microphone input TXIN with an input resistance of 20 k
.
The DC biasing of the input is 0 V. The gain of the input
stage varies according to the mode of the TEA1099H.
In the transmit mode, the gain is at its maximum; in the
receive mode, it is at its minimum and in the Idle mode it is
halfway between maximum and minimum.
Switch-over from one mode to the other is smooth and
click-free. The output TXOUT is biased at two diodes
voltage and has a current capability equal to 20
μ
A (RMS).
In the transmit mode, the overall gain of the microphone
amplifier (from pins TXIN to TXOUT) can be adjusted from
0 up to 31 dB to suit specific application requirements.
The gain is proportional to the value of R
GATX
and equals
15.2 dB with R
GATX
= 30.1 k
. Without limitation from the
output, the microphone input stage can accommodate
signals up to 18 mV (RMS) at room temperature for 2% of
THD.
Fig.6 Handsfree telephone set principles.
handbook, full pagewidth
MGM299
DUPLEX
CONTROL
HYBRID
telephone
line
sidetone
acoustic
coupling
相關PDF資料
PDF描述
TEA1103TS TERM BLOCK 7.5MM VERT 3POS PCB
TEA1103 Fast charge ICs for NiCd and NiMH batteries
TEA1103T Fast charge ICs for NiCd and NiMH batteries
TEA1118A Versatile cordless transmisssion circuit
TEA1118AM LED TRUE GREEN 532NM SMD
相關代理商/技術參數
參數描述
TEA1100 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Battery monitor for Nicd and NiMH chargers
TEA1100T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Battery monitor for Nicd and NiMH chargers
TEA1101 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Battery monitor for Nicd and NiMH chargers
TEA1101T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Battery monitor for Nicd and NiMH chargers
TEA1102 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Fast charge ICs for NiCd, NiMH, SLA and LiIon