- 您現在的位置：買賣IC網 > PDF目錄383989 > TDA4882 (NXP SEMICONDUCTORS) Advanced monitor video controller for OSD PDF資料下載
參數資料
| 型號： | TDA4882 |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 消費家電 |
| 英文描述： | Advanced monitor video controller for OSD |
| 中文描述： | SPECIALTY CONSUMER CIRCUIT, PDIP20 |
| 封裝： | 0.300 INCH, PLASTIC, SOT-146-1, DIP-20 |
| 文件頁數： | 6/28頁 |
| 文件大小： | 263K |
| 代理商： | TDA4882 |
第1頁第2頁第3頁第4頁第5頁當前第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁
1997 Sep 04
6
Philips Semiconductors
Product specification
Advanced monitor video controller for OSD
TDA4882
7.5
Input clamping
The clamping pulse (Fig.17) is for input clamping only.
The input signals are at black level during the clamping
pulse and are clamped to an internal artificial black level.
The coupling capacitors provide black-level storage.
The threshold for the clamping pulse is higher than that for
vertical blanking, therefore, the rise and fall times of the
clamping pulse need to be faster than 75 ns/V during
transition from 1 to 3.5 V.
7.6
Vertical blanking
The vertical blanking pulse (Fig.17) will be detected if the
input voltage is higher than the threshold voltage for
approximately 320 ns but does not exceed the threshold
for the clamping pulse in the time between. During the
vertical blanking pulse the input clamping is disabled to
avoid misclamping in the event of composite input signals.
The input signal is blanked and the artificial black level is
inserted instead. Also the brightness is set internally to its
nominal value, thus the output signal is at reference black
level. The DC value of the reference black level will be
adjusted by cut-off stabilization.
7.7
Horizontal blanking
During horizontal blanking (Fig.18) the output signal is set
to reference black level and output clamping is activated.
If the voltage exceeds the switch-off threshold, the signal
is blanked and switched to ultra-black level for screen
protection and spot suppression during V-flyback.
Ultra-black level is the lowest possible channel output
voltage and is not dependent on cut-off stabilization.
7.8
Cut-off and black-level stabilization
For cut-off stabilization (DC coupling to the CRT) and
black-level stabilization (AC coupling) the video signal at
the cathode or the coupling capacitor is divided by an
adjustable voltage divider and fed to the channel feedback
inputs. During horizontal blanking time this signal is
compared with an internal DC voltage of approximately
5.8 V. Any difference will lead to a reference black-level
correction by charging or discharging the integrated
capacitor which stores the reference black-level
information between the horizontal blanking pulses.
7.9
On Screen Display
For OSD (Fig.3), fast switching of control pin 6 to less than
1 V (e.g. 0.7 V) blanks the input signals. The OSD signals
can easily be inserted to the external cascode transistor.
7.10
Test mode
During test mode (pins 9 and 10 connected to V
P
) the
black levels at the channel voltage outputs are set
internally to typical 0.7 V with nominal brightness and
3 V DC at channel signal inputs.
Fig.3 OSD application.
handbook, full pagewidth
MHA816
OSD
fast blanking
4.7 k
1 k
150
220
100 pF
20
channel 1
channel 2
current
output
BFQ235
PH2222
channel 3
OSD
signal input
TDA4882
contrast
17
14
6
depending on
channel gain
1 k
to 10 k
PH2222
相關PDF資料 |
PDF描述 |
|---|---|
| TDA4884 | Advanced monitor video controller for OSD |
| TDA4885 | 150 MHz video controller with I2C-bus |
| TDA4886A | 140 MHz video controller with I2C-bus |
| TDA4886 | 140 MHz video controller with I2C-bus |
| TDA4887 | 160 MHz bus-controlled monitor video preamplifier |
相關代理商/技術參數 |
參數描述 |
|---|---|
| TDA4883 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Non-VGA Video Controller |
| TDA4884 | 制造商:NXP Semiconductors 功能描述:3 CHANNEL, VIDEO PREAMPLIFIER, PDIP20 |
| TDA4885 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
| TDA4885/V2 | 制造商:NXP Semiconductors 功能描述: |
| TDA4886 | 制造商:PHILIPS-SEMI 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。