- 您現在的位置：買賣IC網 > PDF目錄383849 > SWPTC-01 SWPTC-01 Programming Software for PTC-01 Programmer PDF資料下載
參數資料
| 型號： | SWPTC-01 |
| 英文描述： | SWPTC-01 Programming Software for PTC-01 Programmer |
| 中文描述： | SWPTC - 01 PTC軟件編程，01編程 |
| 文件頁數： | 10/21頁 |
| 文件大小： | 914K |
| 代理商： | SWPTC-01 |
PTC-01
Programmer for Melexis PTC Devices
PTC-01 Programmer User’s Manual Rev 1.2 15/NOV/2001 Page 10
Device Parameters
Listed in rows are the programmable features, or parameters, of the MLX90215. The parameters combined
represent the programmable bits of memory in the MLX90215. The parameters are divided into two col-
umns, RAM and ROM. The two columns represent two operating modes of the MLX90215. The RAM mode
is a test mode that uses volatile memory to store device parameters. Because the device is using temporary
memory the device parameters can be loaded as many times as needed. This mode is ideal for adjusting
the device parameters to calibrate the sensor. To operate the device in RAM, or test, mode click on the RAM
parameter and execute the load function.
The ROM mode is the normal operating mode of the MLX90215. In this mode the device uses parameters
set in nonvolatile memory. Values set in ROM are physically burnt into the IC and cannot be reset. The user
can use the read back function to read the parameters set in ROM. After the read back function is performed
the results are displayed in the ROM column. This mode is used for making measurements and analysis.
To operate the device in ROM, or normal operating, mode click on the ROM parameter and execute the load
function.
For more information on the use of the device parameters refer to the MLX90215 datasheet. Please read the
sections in this document on action buttons for more information on the Load, Zap, and read back, functions.
Important Note:
The RAM mode and Read back functions are disabled when the Memlock bit is set in ROM. If the Memlock
bit is set the device can only be used in ROM mode. Please refer to the MLX90215 datasheet for more infor-
mation on the Memlock bit.
Programmable Supply
The programmable supply feature is self explanatory. To set the supply click in the box and type in the de-
sired voltage. Next execute the Load function to set the supply output. For specifications on the programma-
ble supply refer to the programmer’s datasheet.
Device Presets
The presets are a useful tool for remembering device parameters. To set a preset, first set the desired de-
vice parameters. Next, click the set preset button. Select one of the available preset buttons, type in the de-
sired name and click OK. To load the preset device parameters simply click on the desired preset button.
The figures below give an example or two presets being set. One preset is for a device with low sensitivity or
gain and the second is for a device with high sensitivity. When the device session is saved the preset infor-
mation is saved. If the device session is not saved the preset information will be lost upon exiting the pro-
gram.
相關PDF資料 |
PDF描述 |
|---|---|
| SWR200CF | Waveform Generator/Support |
| SWR200MF | Waveform Generator/Support |
| SWR300CD | Analog IC |
| SWR300CS | Analog IC |
| SWR300LD | Analog IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SWPTHROCKERDPST | 制造商:Schaffner 功能描述:SWITCHES AND VOLTAGE SELECTORS |
| SWP-TX-1 UNICOM | 制造商:FLORIDA MISC. 功能描述: 制造商:Florida Misc. 功能描述: |
| SWP-TX-2 UNICOM | 制造商:FLORIDA MISC. 功能描述: 制造商:Florida Misc. 功能描述: |
| SWPZ-A041GG-M025 | 制造商:JST Manufacturing 功能描述:WPZ Serie Female Terminal |
| SWQ327-30.720 | 制造商:SUNTSU 功能描述: |
發(fā)布緊急采購，3分鐘左右您將得到回復。