
STM1810/1811/1812/1813/1815/1816/1817/1818
14/20
MAXIMUM RATING
Stressing the device above the rating listed in the
Absolute Maximum Ratings” table may cause per-
manent damage to the device. These are stress
ratings only and operation of the device at these or
any other conditions above those indicated in the
Operating sections of this specification is not im-
plied. Exposure to Absolute Maximum Rating con-
ditions for extended periods may affect device
reliability. Refer also to the STMicroelectronics
SURE Program and other relevant quality docu-
ments.
Table 7. Absolute Maximum Ratings
Note: 1. Reflow at peak temperature of 255°C to 260°C for < 30 seconds (total thermal budget not to exceed 180°C for between 90 to 150
seconds).
DC AND AC PARAMETERS
This section summarizes the operating measure-
ment conditions, and the DC and AC characteris-
tics of the device. The parameters in the DC and
AC characteristics Tables that follow, are derived
from tests performed under the Measurement
Conditions summarized in Table
8
, Operating and
AC Measurement Conditions. Designers should
check that the operating conditions in their circuit
match the operating conditions when relying on
the quoted parameters.
Table 8. Operating and AC Measurement Conditions
Figure 21. AC Testing Input/Output Waveforms
Symbol
Parameter
Value
Unit
T
STG
Storage Temperature (V
CC
Off)
–55 to 150
°C
T
SLD(1)
Lead Solder Temperature for 10 seconds
260
°C
V
IO
Input or Output Voltage
–0.3 to V
CC
+0.3
V
V
CC
Supply Voltage
–0.3 to 7.0
V
I
O
Output Current
20
mA
P
D
Power Dissipation
320
mW
Parameter
STM1810 - 1818
Unit
V
CC
Supply Voltage
1.0 to 5.5
V
Ambient Operating Temperature (T
A
)
–40 to 105
°C
Input Rise and Fall Times
≤
5
ns
Input Pulse Voltages
0.2 to 0.8V
CC
V
Input and Output Timing Ref. Voltages
0.3 to 0.7V
CC
V
AI02568
0.8VCC
0.2VCC
0.7VCC
0.3VCC