參數資料
型號： R2025D
廠商： RICOH COMPANY LTD
元件分類： XO, clock
英文描述： High precision I2C-Bus Real-Time Clock Module
中文描述： REAL TIME CLOCK, DSO20
封裝： 6.10 X 5 MM, 1.30 MM HEIGHT, SON-22/20
文件頁數： 27/47頁
文件大?。?/td> 524K
代理商： R2025D
R2025S/D
27
Data Transmission under Special Condition
The R2025S/D holds the clock tentatively for duration from Start Condition to avoid invalid read or write clock on
carrying clock. When clock carried during this period, which will be adjusted within approx. 61
μ
s from Stop
Condition. To prevent invalid read or write, clock and calendar data shall be made during one transmission
operation (from Start Condition to Stop Condition). When 0.5 to 1.0 second elapses after Start Condition, any
access to the R2025S/D is automatically released to release tentative hold of the clock, and access from the CPU
is forced to be terminated (The same action as made Stop Condition is received: automatic resume function from
I2C-Bus interface). Therefore, one access must be complete within 0.5 seconds. The automatic resume
function prevents delay in clock even if SCL is stopped from sudden failure of the system during clock read
operation.
Also a second Start Condition after the first Start Condition and before the Stop Condition is regarded “Repeated
Start Condition”. Therefore, when 0.5 to 1.0 seconds passed after the first Start Condition, an access to the
R2025S/D is automatically released.
If access is tried after automatic resume function is activated, no acknowledge signal will be output for writing
while FFh will be output for reading.
The user shall always be able to access the real-time clock as long as three conditions are met.
(1) No Stop Condition shall be generated until clock and calendar data read/write is started and completed.
(2) One cycle read/write operation shall be complete within 0.5 seconds.
(3) Do not make Start Condition within 61
μ
s from Stop Condition. When clock is carried during the access,
which will be adjusted within approx. 61
μ
s from Stop Condition.
Bad example of reading from seconds to hours (invalid read)
(Start Condition)
→
(Read of seconds)
→
(Read of minutes)
→
(Stop Condition)
→
(Start Condition)
→
(Read of
hour)
→
(Stop Condition)
Assuming read was started at 05:59:59 P.M. and while reading seconds and minutes the time advanced to
06:00:00 P.M. At this time second digit is hold so read the read as 05:59:59. Then the R2025S/D confirms (Stop
Condition) and carries second digit being hold and the time change to 06:00:00 P.M. Then, when the hour digit is
read, it changes to 6. The wrong results of 06:59:59 will be read.
相關PDF資料
PDF描述
R2025S High precision I2C-Bus Real-Time Clock Module
R5326Z003B Automatic Mode Shift 2ch 150mA LDO
R5326Z004A Automatic Mode Shift 2ch 150mA LDO
R5326Z004B Automatic Mode Shift 2ch 150mA LDO
R5326Z005A Automatic Mode Shift 2ch 150mA LDO
相關代理商/技術參數
參數描述
R2025S 制造商:RICOH 制造商全稱:RICOH electronics devices division 功能描述:High precision I2C-Bus Real-Time Clock Module
R2-0267-02 制造商:Southco 功能描述:
R2-0268-02 制造商:Southco 功能描述:
R20-3000502 功能描述:支架與墊片 M2 x 5mm HEXAGONAL MALE/FEMALE BRASS RoHS:否 制造商:Schurter 類型:Transipillar Spacers 長度:16 m 螺紋大小:M4 外徑:10 mm 材料:Nylon with Steel 電鍍:Zinc
R20-3000802 功能描述:支架與墊片 M2 x 8mm HEXAGONAL MALE/FEMALE BRASS RoHS:否 制造商:Schurter 類型:Transipillar Spacers 長度:16 m 螺紋大小:M4 外徑:10 mm 材料:Nylon with Steel 電鍍:Zinc
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*