參數資料
型號： PCF8813U
廠商： NXP Semiconductors N.V.
英文描述： (67 + 1) x 102 pixels matrix LCD driver
中文描述： （67 1）× 102像素矩陣LCD驅動器
文件頁數： 17/72頁
文件大?。?/td> 446K
代理商： PCF8813U
2004 Mar 05
17
Philips Semiconductors
Product specification
(67 + 1)
×
102 pixels matrix LCD driver
PCF8813
8
PARALLEL INTERFACES
The parallel interface is an 8-bit bidirectional interface for
communication between the microcontroller and the LCD
driver chip. Two different parallel interfaces can be
selected by the inputs PS2, PS1 and PS0.
8.1
6800-type parallel interface
The interface functions of the 6800-type parallel interface
are shown in Table 2.
Table 2
6800-type parallel interface function
The 6800-type parallel interface can be configured to have
the clock connected to the Enable input (E) with timing as
shown in Fig.38, or with the clock connected to the chip
select input (SCE) and the Enable (E) is tied HIGH with
timing as shown in Fig.39. The PCF8813 is capable of
detecting these different modes automatically.
8.2
8080-type parallel interface
Table 3 shows the interface functions of the 8080-type
parallel interface.
Table 3
6800-type parallel interface function
9
SERIAL INTERFACES
Communication with the microcontroller can also be via a
clock-synchronized serial peripheral interface. It is
possible to select two different 3-line interfaces (SPI and
serial interface) or a 4-line serial interface (SPI). Selection
of the interface is made with the inputs PS2, PS1 and PS0
(see Section 7.1).
9.1
Serial peripheral interface
The Serial Peripheral Interface (SPI) is a 3-line or 4-line
interface for communication between the microcontroller
and the LCD driver. The 3-line interface requires a chip
enable input (SCE), serial clock (SCLK) and serial
data (SDATA). For the 4-line serial interface, a separate
D/C line is added. The PCF8813 is connected to the serial
data I/O (SDATA) of the microcontroller via the pads data
input (SDATA) and data output (SDOUT) connected
together.
9.1.1
W
RITE MODE
The display data/command indication may be controlled
viasoftwareorbytheD/C selectinput.WhentheD/C input
is used, display data is transmitted when D/C is HIGH, and
command data is transmitted when D/C is LOW (see
Figs 15 and 16). When D/C is not used, the display data
length instruction is used to indicate that a specific number
of display data bytes (1 to 256) are to be transmitted (see
Fig.17). The byte that follows the display data string is
handled as an instruction command.
If SCE is pulled HIGH during a serial display data stream,
the interrupted byte is invalid data but all previously
transmitted data is valid. The next byte received will be
handled as an instruction command (see Fig.18).
D/C
R/WR
OPERATION
0
0
1
1
0
1
0
1
command data write
read status register
display data write
none
D/C
RD
WR
OPERATION
0
0
1
1
1
0
1
1
0
1
0
1
command data write
read status register
display data write
none
相關PDF資料
PDF描述
PCF8820 67 x 101 Grey-scale/ECB colour dot matrix LCD driver
PCF8820U 67 x 101 Grey-scale/ECB colour dot matrix LCD driver
PCF8831 STN RGB - 160 output row driver
PCF8831U STN RGB - 160 output row driver
PCF8833 STN RGB - 132 X 132 X 3 driver
相關代理商/技術參數
參數描述
PCF8820 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:67 x 101 Grey-scale/ECB colour dot matrix LCD driver
PCF8820U 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:67 x 101 Grey-scale/ECB colour dot matrix LCD driver
PCF8831 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:STN RGB - 160 output row driver
PCF8831U 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:STN RGB - 160 output row driver
PCF8832 制造商:未知廠家 制造商全稱:未知廠家 功能描述:STN RGB - 384 output column driver
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*