參數資料
型號： P610ARM-KW
廠商： Zarlink Semiconductor Inc.
英文描述： General purpose 32-bit microprocessor
中文描述： 通用32位微處理器
文件頁數： 60/173頁
文件大?。?/td> 897K
代理商： P610ARM-KW
Instruction Set - LDR, STR
ARM610 Data Sheet
4-32
O
4.8.2 Halfword load and stores
Setting S=0 and H=1 may be used to transfer unsigned halfwords between an
ARM610 register and memory.
The action of LDRH and STRH instructions is influenced by the BIGEND control
signal. The two possible configurations are described in the section below.
4.8.3 Signed byte and halfword loads
The S bit controls the loading of sign-extended data. When S=1 the H bit selects
between Bytes (H=0) and halfwords (H=1). The L bit should not be set low (Store)
when Signed (S=1) operations have been selected.
The LDRSB instruction loads the selected Byte into bits 7 to 0 of the destination
register and bits 31 to 8 of the destination register are set to the value of bit 7, the sign
bit.
The LDRSH instruction loads the selected halfword into bits 15 to 0 of the destination
register and bits 31 to 16 of the destination register are set to the value of bit 15, the
sign bit.
The action of the LDRSB and LDRSH instructions is influenced by the BIGEND control
signal. The two possible configurations are described in the following section.
4.8.4 Endianness and byte/halfword selection
Little-endian configuration
A signed byte load (LDRSB) expects data on data bus inputs 7 through to 0 if the
supplied address is on a word boundary, on data bus inputs 15 through to 8 if it is a
word address plus one byte, and so on. The selected byte is placed in the bottom 8 bit
of the destination register, and the remaining bits of the register are filled with the sign
bit, bit 7 of the byte. Please see
·
Figure 3-2: Little endian addresses of bytes within
wordson page 3-3
A halfword load (LDRSH or LDRH) expects data on data bus inputs 15 through to 0 if
the supplied address is on a word boundary and on data bus inputs 31 through to 16
if it is a halfword boundary, (A[1]=1).The supplied address should always be on a
halfword boundary. If bit 0 of the supplied address is HIGH, the ARM610 will load an
unpredictable value. The selected halfword is placed in the bottom 16 bits of the
destination register. For unsigned halfwords (LDRH), the top 16 bits of the register are
filled with zeros and for signed halfwords (LDRSH) the top 16 bits are filled with the
sign bit, bit 15 of the halfword.
A halfword store (STRH) repeats the bottom 16 bits of the source register twice across
the data bus outputs 31 through to 0. The external memory system should activate the
appropriate halfword subsystem to store the data. Note that the address must be
halfword aligned, if bit 0 of the address is HIGH this will cause unpredictable
behaviour.
相關PDF資料
PDF描述
P6121-AU120 Incremental Encoders
P6111-AP120 Incremental Encoders
P6111-AP192 Incremental Encoders
P6111-AQ120 Incremental Encoders
P6111-AQ192 Incremental Encoders
相關代理商/技術參數
參數描述
P6-10R 制造商:Panduit Corp 功能描述:PANDUIT
P6-10R-E 功能描述:端子 NON-INSL.RING #6 #10 RoHS:否 制造商:AVX 產品:Junction Box - Wire to Wire 系列:9826 線規:26-18 接線柱/接頭大小: 絕緣: 顏色:Red 型式:Female 觸點電鍍:Tin over Nickel 觸點材料:Beryllium Copper, Phosphor Bronze 端接類型:Crimp
P610R-E 制造商:Panduit Corp 功能描述:
P6-10RHT6-E 制造商:Panduit Corp 功能描述:Ring Terminal 6AWG 30.73mm 11.94mm Nickel 制造商:Panduit Corp 功能描述:RING TERMINAL, HIGH TEMPERATUR 制造商:Panduit Corp 功能描述:RING TERMINAL, HIGH TEMPERATURE, NON-INS - Bag
P6-10RHT6-T 制造商:Panduit Corp 功能描述:RING TERMINAL, HIGH TEMPERATUR 制造商:Panduit Corp 功能描述:RING TERMINAL, HIGH TEMPERATURE, NON-INS - Bag
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*