
NB3N201S, NB3N206S
http://onsemi.com
7
Table 7. RECEIVER AC CHARACTERISTICS VCC = 3.3 ±10% V( 3.0 to 3.6 V), GND = 0 V, TA = 40°C to +85°C (Note 7) Symbol
Characteristic
Min
Typ
Max
Unit
tPLH / tPHL
Propagation Delay (See Figure
12)2
4
6
ns
tPHZ / tPLZ
Disable Time HIGH or LOW state to High Impedance (See Figure
13)10
ns
tPZH / tPZL
Enable Time High Impedance to HIGH or LOW state (See Figure
13)15
ns
tSK(P)
Pulse Skew (|tPLH tPHL|) (See Figure 14) CL = 5 pF Type 1
Type 2
100
300
500
ps
tSK(PP)
Device to Device Skew similar path and conditions (See Figure 12) CL = 5 pF 1
ns
tJIT(PER)
Period Jitter RMS, 100 MHz (Source: VID = 200 mVpp for 201 and 203, VID =
400 mVpp for 206 and 207, VCM =1 V, tr/tf 0.5 ns, 10 and 90 % points, 30k samples.
Source jitter deembedded from Output values ) (See Figure
14)4
7
ps
tJIT(PP)
Peaktopeak Jitter, 200 Mbps 2151 PRBS (Source tr/tf 0.5 ns, 10% and 90% points,
100k samples. Source jitter deembedded from Output values) (See Figure
14)Type 1
Type 2
300
450
700
800
ps
tr / tf
Differential Output rise and fall times (See Figure 14) CL = 15 pF 1
2.3
ns
7. Typ value at 25°C and 3.3 VCC supply voltage. .
Figure 3. Driver Voltage and Current Definitions
A. All resistors are 1% tolerance.
Figure 4. Differential Output Voltage Test Circuit