參數資料
型號: MPC952FA
廠商: INTEGRATED DEVICE TECHNOLOGY INC
元件分類: 時鐘及定時
英文描述: 952 SERIES, PLL BASED CLOCK DRIVER, 11 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32
封裝: LQFP-32
文件頁數: 1/7頁
文件大?。?/td> 425K
代理商: MPC952FA
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MPC952/D
1
REV 5
Motorola, Inc. 2001
03/01
Low Voltage PLL Clock Driver
The MPC952 is a 3.3V compatible, PLL based clock driver device
targeted for high performance clock tree applications. The device
features a fully integrated PLL with no external components required.
With output frequencies of up to 180MHz and eleven low skew outputs
the MPC952 is well suited for high performance designs. The device
employs a fully differential PLL design to optimize jitter and noise
rejection performance. Jitter is an increasingly important parameter as
more microprocessors and ASiC’s are employing on chip PLL clock
distribution.
Fully Integrated PLL
Output Frequency up to 180MHz
High Impedance Disabled Outputs
Compatible with PowerPC, Intel and High Performance RISC
Microprocessors
Output Frequency Configurable
LQFP Packaging
±100ps Cycle–to–Cycle Jitter
The MPC952 features three banks of individually configurable outputs.
The banks contain 5 outputs, 4 outputs and 2 outputs. The internal divide
circuitry allows for output frequency ratios of 1:1, 2:1, 3:1 and 3:2:1. The
output frequency relationship is controlled by the fsel frequency control
pins. The fsel pins as well as the other inputs are LVCMOS/LVTTL
compatible inputs.
The MPC952 uses external feedback to the PLL. This features allows
for the use of the device as a “zero delay” buffer. Any of the eleven
outputs can be used as the feedback to the PLL. The VCO_Sel pin allows for the choice of two VCO ranges to optimize PLL
stability and jitter performance. The MR/OE pin allows the user to force the outputs into high impedance for board level test.
For system debug the PLL of the MPC952 can be bypassed. When forced to a logic HIGH, the PLLEN input will route the
signal on the RefClk input around the PLL directly to the internal dividers. Because the signal is routed through the dividers, it
may take several transitions of the RefClk to affect a transition on the outputs. This features allows a designer to single step the
design for debug purposes.
The outputs of the MPC952 are LVCMOS outputs. The outputs are optimally designed to drive terminated transmission lines.
For applications using series terminated transmission lines each MPC952 output can drive two lines. This capability provides an
effective fanout of 22, more than enough clocks for most clock tree designs. For more information on driving transmission lines
consult the applications section of this data sheet.
PowerPC is a trademark of International Business Machines Corporation. Pentium is a trademark of Intel Corporation.
MPC952
LOW VOLTAGE
PLL CLOCK DRIVER
FA SUFFIX
LQFP PACKAGE
CASE 873A-02
Freescale
Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc.
..
DATA SHEET
MPC952
IDT Low Voltage PLL Clock Driver
Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc
MPC952
1
Low Voltage PLL Clock Driver
相關PDF資料
PDF描述
MPC954DT MPC900 SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO24
MPC961PFA 961 SERIES, PLL BASED CLOCK DRIVER, 17 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP32
MPC962308D-4R2 962308 SERIES, PLL BASED CLOCK DRIVER, 8 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO16
MPC962308D-2 962308 SERIES, PLL BASED CLOCK DRIVER, 8 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO16
MPC962308D-5H 962308 SERIES, PLL BASED CLOCK DRIVER, 8 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO16
相關代理商/技術參數
參數描述
MPC953 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:LOW VOLTAGE PLL CLOCK DRIVER
MPC958 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:LOW VOLTAGE PLL CLOCK DRIVER
MPC9600 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:LOW VOLTAGE 2.5 V AND 3.3 V CMOS PLL CLOCK DRIVER
MPC9600AE 功能描述:時鐘發生器及支持產品 RoHS:否 制造商:Silicon Labs 類型:Clock Generators 最大輸入頻率:14.318 MHz 最大輸出頻率:166 MHz 輸出端數量:16 占空比 - 最大:55 % 工作電源電壓:3.3 V 工作電源電流:1 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:QFN-56
MPC9600AER2 功能描述:時鐘緩沖器 RoHS:否 制造商:Texas Instruments 輸出端數量:5 最大輸入頻率:40 MHz 傳播延遲(最大值): 電源電壓-最大:3.45 V 電源電壓-最小:2.375 V 最大功率耗散: 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LLP-24 封裝:Reel