參數資料
型號: MC68302FC20CR2
廠商: MOTOROLA INC
元件分類: 微控制器/微處理器
英文描述: 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP132
封裝: 0.950 X 0.950 INCH, 0.025 INCH PITCH, PLASTIC, QFP-132
文件頁數: 81/128頁
文件大?。?/td> 641K
代理商: MC68302FC20CR2
ETHERNET Controller
MOTOROLA
MC68EN302 REFERENCE MANUAL
4-17
W—Wrap (Final BD in Table), written by user.
0 = This is not the last buffer descriptor in the Tx BD table.
1 = This is the last buffer descriptor in the Tx BD table. After this buffer has been used,
the Ethernet controller transmits data from the first BD in the table. The maximum
number of Tx BDs in this table is programmable through the BDSIZE bits.
I—Interrupt, written by user.
0 = No interrupt is generated after this buffer has been serviced.
1 = TBINT is set in the Ethernet event register after this buffer has been serviced. If
enabled through the mask register, this bit can cause interrupts to the host.
L—Last in Frame, written by user.
0 = The buffer is not the last in the transmit frame.
1 = The buffer is the last in the transmit frame.
TC—Tx CRC, written by user (only valid if L = 1).
0 = End transmission immediately after the last data byte.
1 = Transmit the CRC sequence after the last data byte.
DEF—Defer Indication, written by Ethernet controller (only valid if L = 1).
The Ethernet controller had to defer while attempting frame transmission. DEF is not set if
a collision occurs during transmission.
HB—Heartbeat Error, written by Ethernet controller (only valid if L = 1).
The collision input was not asserted within the heartbeat window after transmit completion.
HB may be set only if HBC is not set in the ECNFIG register.
LC—Late Collision, written by Ethernet controller (only valid if L = 1).
A collision has occurred after 56 data bytes have been transmitted. The Ethernet controller
terminates the transmission.
RL—Retransmission Limit, written by Ethernet controller (only valid if L = 1).
The transmitter has failed (Retry Limit + 1) attempts to successfully transmit a message due
to repeated collisions on the medium.
RC—Retry Count, written by Ethernet controller (only valid if L = 1).
These four bits indicate the number of retries required before this frame was successfully
transmitted. If RC = 0, then the frame was transmitted correctly the first time. If RC = 15,
then the frame was transmitted successfully while the retry count was at its maximum value.
If RL is set, then RC has no meaning.
UN—Underrun, written by Ethernet controller (only valid if L = 1).
A transmit FIFO underrun occurred while transmitting one or more of the the data buffers
associated with this frame. When FIFO underrun occurs, frame transmission halts once an
incorrect CRC is appended. The remaining buffer(s) associated with this frame are DMA’d
and dumped by the transmit logic.
相關PDF資料
PDF描述
MC68302FC16CR2 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP132
MC68LC302PU20CT 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP100
MC68EN302PV25BT 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP144
MC68302PV33C 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP144
SPAK302PV16VC 4 CHANNEL(S), 10M bps, LOCAL AREA NETWORK CONTROLLER, PQFP144
相關代理商/技術參數
參數描述
MC68302FC25 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:Integrated Multiprotocol Processor User’s Manual
MC68302FC25C 功能描述:IC MPU MULTI-PROTOCOL 132-PQFP RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微處理器 系列:M683xx 標準包裝:2 系列:MPC8xx 處理器類型:32-位 MPC8xx PowerQUICC 特點:- 速度:133MHz 電壓:3.3V 安裝類型:表面貼裝 封裝/外殼:357-BBGA 供應商設備封裝:357-PBGA(25x25) 包裝:托盤
MC68302FE16 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Communications Controller
MC68302FE16C 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Communications Controller
MC68302FE20 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Communications Controller