參數資料
型號： MBM29DL161BE-90PBT
廠商： FUJITSU LTD
元件分類： PROM
英文描述： 1M X 16 FLASH 3V PROM, 90 ns, PBGA48
封裝： PLASTIC, FBGA-48
文件頁數： 32/76頁
文件大小： 1145K
代理商： MBM29DL161BE-90PBT
MBM29DL16XTE/BE70/90
38
*1 : Successive reads from the erasing or erase-suspend sector cause DQ2 to toggle.
*2 : Reading from non-erase suspend sector address indicates logic “1” at the DQ2 bit.
DQ7
Data Polling
The MBM29DL16XTE/BE devices feature Data Polling as a method to indicate to the host that the Embedded
Algorithms are in progress or completed. During the Embedded Program Algorithm an attempt to read the
devices will produce the complement of the data last written to DQ7. Upon completion of the Embedded Program
Algorithm, an attempt to read the device will produce the true data last written to DQ7. During the Embedded
Erase Algorithm, an attempt to read the device will produce a “0” at the DQ7 output. Upon completion of the
Embedded Erase Algorithm an attempt to read the device will produce a “1” at the DQ7 output. The flowchart
for Data Polling (DQ7) is shown in “(3) Data Polling Algorithm” in sFLOW CHART.
For programming, the Data Polling is valid after the rising edge of fourth write pulse in the four write pulse
sequence.
For chip erase and sector erase, the Data Polling is valid after the rising edge of the sixth write pulse in the six
write pulse sequence. Data Polling must be performed at sector address within any of the sectors being erased
and not a protected sector. Otherwise, the status may not be valid.
If a program address falls within a protected sector, Data Polling on DQ7 is active for approximately 1
s, then
that bank returns to the read mode. After an erase command sequence is written, if all sectors selected for
erasing are protected, Data Polling on DQ7 is active for approximately 400
s, then the bank returns to read mode.
Once the Embedded Algorithm operation is close to being completed, the MBM29DL16XTE/BE data pins (DQ7)
may change asynchronously while the output enable (OE) is asserted low. This means that the devices are
Hardware Sequence Flags Table
Status
DQ7
DQ6
DQ5
DQ3
DQ2
In Progress
Embedded Program Algorithm
DQ7
Toggle
0
1
Embedded Erase Algorithm
0
Toggle
0
1
Toggle*1
Erase
Suspended
Mode
Erase Suspend Read
(Erase Suspended Sector)
110
0
Toggle
Erase Suspend Read
(Non-Erase Suspended Sector)
Data
Data Data
Data
Erase Suspend Program
(Non-Erase Suspended Sector)
DQ7
Toggle
0
1 *2
Program
Suspended
Mode
Program Suspend Read
(Program Suspended Sector)
Data
Data Data
Data
Program Suspend Read
(Non-Program Suspended Sector)
Data
Data Data
Data
Exceeded
Time Limits
Embedded Program Algorithm
DQ7
Toggle
1
0
1
Embedded Erase Algorithm
0
Toggle
1
N/A
Erase
Suspended
Mode
Erase Suspend Program
(Non-Erase Suspended Sector)
DQ7
Toggle
1
0
N/A
相關PDF資料
PDF描述
MBM29DL163TD12PBT 1M X 16 FLASH 3V PROM, 120 ns, PBGA48
MBM29DL32TF70TN 2M X 16 FLASH 3V PROM, 70 ns, PDSO48
MBM29F800TA-70PFTN-E1 512K X 16 FLASH 5V PROM, 70 ns, PDSO48
MBR-2051-1B5T 51 CONTACT(S), MALE, D MICROMINIATURE CONNECTOR, SOLDER, PLUG
MBR-2069-0A1T 69 CONTACT(S), MALE, D MICROMINIATURE CONNECTOR, SOLDER, PLUG
相關代理商/技術參數
參數描述
MBM29DL161BE-90TN 制造商:SPANSION 制造商全稱:SPANSION 功能描述:FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT Dual Operation
MBM29DL161BE-90TR 制造商:SPANSION 制造商全稱:SPANSION 功能描述:FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT Dual Operation
MBM29DL161TD 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16M (2M x 8/1M x 16) BIT Dual Operation
MBM29DL161TD-70PBT 制造商:SPANSION 制造商全稱:SPANSION 功能描述:FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT Dual Operation
MBM29DL161TD-70PFTN 制造商:SPANSION 制造商全稱:SPANSION 功能描述:FLASH MEMORY CMOS 16M (2M X 8/1M X 16) BIT Dual Operation
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*