參數資料
型號: M38037M6-122FP
廠商: Mitsubishi Electric Corporation
英文描述: TACHOMETER ONE CHANNEL
中文描述: 單芯片8位CMOS微機
文件頁數: 38/135頁
文件大小: 2055K
代理商: M38037M6-122FP
38
3803/3804 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
(3) Event counter mode
G
Mode selection
This mode can be selected by setting
10
to the timer X operating
mode bits (bits 1 and 0) and the timer Y operating mode bits (bits
5 and 4) of the timer XY mode register (address 0023
16
).
G
Explanation of operation
The operation is the same as the timer mode
s except that the
timer counts signals input from the CNTR
0
or CNTR
1
pin. The
valid edge for the count operation depends on the CNTR
0
active
edge switch bit (bit 2) or the CNTR
1
active edge switch bit (bit 6)
of the timer XY mode register (address 0023
16
). When it is
0
, the
rising edge is valid. When it is
1
, the falling edge is valid.
I
Precautions
Set the double-function port of CNTR
0
/CNTR
1
pin and port P5
4
/
P5
5
to input in this mode.
(4) Pulse width measurement mode
G
Mode selection
This mode can be selected by setting
11
to the timer X operating
mode bits (bits 1 and 0) and the timer Y operating mode bits (bits
5 and 4) of the timer XY mode register (address 0023
16
).
G
Explanation of operation
When the CNTR
0
active edge switch bit (bit 2) or the CNTR
1
ac-
tive edge switch bit (bit 6) of the timer XY mode register (address
0023
16
) is
1
, the timer counts during the term of one falling edge
of CNTR
0
/CNTR
1
pin input until the next rising edge of input (
L
term). When it is
0
, the timer counts during the term of one rising
edge input until the next falling edge input (
H
term).
I
Precautions
Set the double-function port of CNTR
0
/CNTR
1
pin and port P5
4
/
P5
5
to input in this mode.
The count operation can be stopped by setting
1
to the timer X
count stop bit (bit 3) and the timer Y count stop bit (bit 7) of the
timer XY mode register (address 0023
16
). The interrupt request bit
is set to
1
each time the timer underflows.
Precautions when switching count source
When switching the count source by the timer 12, X and Y count
source selection bits, the value of timer count is altered in incon-
siderable amount owing to generating of thin pulses on the count
input signals.
Therefore, select the timer count source before setting the value
to the prescaler and the timer.
相關PDF資料
PDF描述
M38034M4-059FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38037M6-133FP SENSOR SST 12MM ZERO SPEED
M38037M6-154FP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38037M6-XXXFP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M38037M8-XXXFP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M38037M8108F 制造商:Panasonic Industrial Company 功能描述:IC
M38037M8H-194HP#U0 制造商:Renesas Electronics Corporation 功能描述:8BIT CISC - Trays
M38039FFHFP#U0 功能描述:IC 740 MCU FLASH 60K 64QFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 產品培訓模塊:CAN Basics Part-1 CAN Basics Part-2 Electromagnetic Noise Reduction Techniques Part 1 M16C Product Overview Part 1 M16C Product Overview Part 2 標準包裝:1 系列:M16C™ M32C/80/87 核心處理器:M32C/80 芯體尺寸:16/32-位 速度:32MHz 連通性:EBI/EMI,I²C,IEBus,IrDA,SIO,UART/USART 外圍設備:DMA,POR,PWM,WDT 輸入/輸出數:121 程序存儲器容量:384KB(384K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:24K x 8 電壓 - 電源 (Vcc/Vdd):3 V ~ 5.5 V 數據轉換器:A/D 34x10b,D/A 2x8b 振蕩器型:內部 工作溫度:-20°C ~ 85°C 封裝/外殼:144-LQFP 包裝:托盤 產品目錄頁面:749 (CN2011-ZH PDF) 配用:R0K330879S001BE-ND - KIT DEV RSK M32C/87
M38039FFHHP 功能描述:MCU 3/5V 56K+4K 64-LQFP RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 標準包裝:250 系列:56F8xxx 核心處理器:56800E 芯體尺寸:16-位 速度:60MHz 連通性:CAN,SCI,SPI 外圍設備:POR,PWM,溫度傳感器,WDT 輸入/輸出數:21 程序存儲器容量:40KB(20K x 16) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:6K x 16 電壓 - 電源 (Vcc/Vdd):2.25 V ~ 3.6 V 數據轉換器:A/D 6x12b 振蕩器型:內部 工作溫度:-40°C ~ 125°C 封裝/外殼:48-LQFP 包裝:托盤 配用:MC56F8323EVME-ND - BOARD EVALUATION MC56F8323
M38039FFH-HP#U 制造商:Renesas Electronics Corporation 功能描述:8BIT 740 CISC 56KB FLASH 16.8MHZ 3.3/5V - Trays