參數資料
型號： M37630M4T-XXXFP
廠商： Mitsubishi Electric Corporation
英文描述： SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
中文描述： 單芯片8位CMOS微機
文件頁數： 14/48頁
文件大?。?/td> 563K
代理商： M37630M4T-XXXFP
MITSUBISHI
ELECTRIC
14
MITSUBISHI MICROCOMPUTERS
7630 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
INTERRUPTS
There are 24 interrupts: 6 external, 17 internal, and 1 software.
Interrupt Control
Each interrupt except the BRK instruction interrupt has both an
interrupt request bit and an interrupt enable bit, and is controlled by
the interrupt disable flag. An interrupt occurs when the correspond-
ing interrupt request and enable bits are “1” and the interrupt dis-
able flag is “0”. Interrupt enable bits can be cleared or set by
software. Interrupt request bits can be cleared by software but can-
not be set by software. The BRK instruction interrupt and reset can-
not be disabled with any flag or bit. The I flag disables all interrupts
except the BRK instruction interrupt and reset. If several interrupt
requests occur at the same time, the interrupt with the highest prior-
ity is accepted first.
Interrupt Operation
Upon acceptance of an interrupt, the following operations are auto-
matically performed.
1.
The processing being executed is stopped.
2.
The contents of the program counter and processor status
register are automatically pushed onto the stack.
Concurrently with the push operation, the interrupt jump
destination address is read from the vector table into the
program counter.
The interrupt disable flag is set and the corresponding interrupt
request bit is cleared.
Notes on use
When the active edge of an external interrupt (INT
0
, INT
1
, CNTR
0
,
CNTR
1
, CWKU or KOI) is changed, the corresponding interrupt
request bit may also be set. Therefore, take the following sequence.
(1) Disable the external interrupt which is selected.
(2) Change the active edge in interrupt edge selection register.
(in the case of CNTR
0
: Timer X mode register; in the case of
CNTR
1
: Timer Y mode register)
(3) Clear the interrupt request bit to “0”.
(4) Enable the external interrupt which is selected.
3.
4.
相關PDF資料
PDF描述
M37630M4T-XXXFS SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37640M4T SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37630 Single Chip 8 Bits CMOS Microcomputer(8位單片機)
M37630E4FS SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37630E4T-XXXFP SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
相關代理商/技術參數
參數描述
M37630M4T-XXXFS 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37630T-RFS 功能描述:BOARD CONV FOR M37630 EMULATOR RoHS:否 類別:編程器，開發系統 >> 配件 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 標準包裝:1 系列:- 附件類型:USB 至 1-Wire? RJ11 適配器 適用于相關產品:1-Wire? 設備 產品目錄頁面:1429 (CN2011-ZH PDF)
M37632EFFS 功能描述:EPROM MCU/8BIT CMOS EMULATION CH RoHS:否 類別:編程器，開發系統 >> 配件 系列:- 標準包裝:1 系列:- 附件類型:適配器板 適用于相關產品:RCB230，RCB231，RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
M37632RFS 功能描述:EMULATION MCU/8BIT CMOS EMULATIO RoHS:否 類別:編程器，開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 傳感器類型:CMOS 成像，彩色（RGB） 傳感范圍:WVGA 接口:I²C 靈敏度:60 fps 電源電壓:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相關產品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP
M3763A 制造商:未知廠家 制造商全稱:未知廠家 功能描述:HORN/SIREN WITH SOFT CHIRP 6 ALARM SOUNDS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*