參數資料
型號: M37534
廠商: Mitsubishi Electric Corporation
英文描述: Single Chip 8 Bits CMOS Microcomputer(8位單片機)
中文描述: 單芯片的CMOS 8位單片機(8位單片機)
文件頁數: 12/53頁
文件大?。?/td> 621K
代理商: M37534
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
7534 Group
MITSUBISHI MICROCOMPUTERS
12
PRELIMINARY
Notice: This is not a final specification.
Some parametric limits are subject to change.
I/O Ports
[Direction registers] PiD
The I/O ports have direction registers which determine the input/out-
put direction of each pin. Each bit in a direction register corresponds
to one pin, and each pin can be set to be input or output.
When “1” is set to the bit corresponding to a pin, this pin becomes an
output port. When “0” is set to the bit, the pin becomes an input port.
When data is read from a pin set to output, not the value of the pin
itself but the value of port latch is read. Pins set to input are floating,
and permit reading pin values.
If a pin set to input is written to, only the port latch is written to and the
pin remains floating.
[Pull-up control] PULL
By setting the pull-up control register (address 0016
16
), ports P0 and
P3 can exert pull-up control by program. However, pins set to output
are disconnected from this control and cannot exert pull-up control.
[Port P1P3 control] P1P3C
By setting the port P1P3 control register (address 0017
16
), a CMOS
input level or a TTL input level can be selected for ports P1
0
, P1
2,
P1
3,
P3
6
and P3
7
by program.
Then, as for the 36-pin version, set “1” to each bit 6 of the port P3
direction register and port P3 register.
As for the 32-pin version, set “1” to respective bits 5, 6, 7 of the port
P3 direction register and port P3 register.
Fig. 13 Structure of port P1P3 control register
Fig. 12 Structure of pull-up control register
Pull-up control register
(PULL: address 0016
16
)
P0
0
pull-up control bit
P0
1
pull-up control bit
P0
2
, P0
3
pull-up control bit
P0
4
– P0
7
pull-up control bit
P3
0
– P3
3
pull-up control bit
P3
4
pull-up control bit
P3
5
, P3
6
pull-up control bit
P3
7
pull-up control bit
Note :
Pins set to output ports are disconnected from pull-up control.
b7 b0
0: Pull-up off
1: Pull-up on
Initial value: FF
16
Port P1P3 control register
(P1P3C: address 0017
16
)
b7 b0
P3
7
/INT
0
input level selection bit
0 : CMOS level
1 : TTL level
P3
6
/INT
1
input level selection bit
0 : CMOS level
1 : TTL leve
P1
0
,P1
2
,P1
3
input level selection bit
0 : CMOS level
1 : TTL level
Not used
相關PDF資料
PDF描述
M37700 16-Bit Single-Chip Microcomputer(16位單片微控制器)
M37721 16-Bit Single-Chip Microcomputer(16位單片微控制器)
M37733MHB Single Chip 16 Bits CMOS Microcomputer(16位單片機)
M37735S4L Single Chip 16 Bits CMOS Microcomputer(16位單片機)
M37736MHL Single Chip 16 Bits CMOS Microcomputer(16位單片機)
相關代理商/技術參數
參數描述
M37534E4FP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37534E4GP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37534E4GP#U1 功能描述:MCU 4/5V 8K PB-FREE 32-LQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 產品培訓模塊:CAN Basics Part-1 CAN Basics Part-2 Electromagnetic Noise Reduction Techniques Part 1 M16C Product Overview Part 1 M16C Product Overview Part 2 標準包裝:1 系列:M16C™ M32C/80/87 核心處理器:M32C/80 芯體尺寸:16/32-位 速度:32MHz 連通性:EBI/EMI,I²C,IEBus,IrDA,SIO,UART/USART 外圍設備:DMA,POR,PWM,WDT 輸入/輸出數:121 程序存儲器容量:384KB(384K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:24K x 8 電壓 - 電源 (Vcc/Vdd):3 V ~ 5.5 V 數據轉換器:A/D 34x10b,D/A 2x8b 振蕩器型:內部 工作溫度:-20°C ~ 85°C 封裝/外殼:144-LQFP 包裝:托盤 產品目錄頁面:749 (CN2011-ZH PDF) 配用:R0K330879S001BE-ND - KIT DEV RSK M32C/87
M37534E8FP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37534E8SP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER