參數資料
型號： M37280MF-XXXSP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP64
封裝： 0.750 INCH, 1.778 MM PITCH, SHRINK, PLASTIC, DIP-64
文件頁數： 94/178頁
文件大?。?/td> 1457K
代理商： M37280MF-XXXSP
22
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
M37280MF–XXXSP, M37280MK–XXXSP
M37280EKSP
MITSUBISHI MICROCOMPUTERS
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Some
paramentic
limits
are
subject
to change.
Rev. 1.0
(4) Serial I/O Interrupt
This is an interrupt request from the clock synchronous serial I/O
function.
(5) f(XIN)/4096 SPRITE OSD Interrupt
The f (XIN)/4096 interrupt occurs regularly with a f(XIN)/4096 pe-
riod. Set bit 0 of the PWM mode register 1 to “0.”
The SPRITE OSD interrupt occurs at the completion of SPRITE
display.
Since f(XIN)/4096 interrupt and SPRITE OSD interrupt share the
same vector, an interrupt source is selected by bit 5 of the SPRITE
OSD control register (address 025816).
(6) Data Slicer Interrupt
An interrupt occurs when slicing data is completed.
(7) Multi-master I2C-BUS Interface Interrupt
This is an interrupt request related to the multi-master I2C-BUS
interface.
(8) A-D Conversion INT3 Interrupt
The A-D conversion interrupt occurs at the completion of A-D
conversion.
The INT3 is an external input,the system detects that the level of
a pin changes from LOW to HIGH or from HIGH to LOW, and
generates an interrupt request. The input active edge can be
selected by bit 6 of the interrupt input polarity register (address
021216) : when this bit is “0,” a change from LOW to HIGH is
detected; when it is “1,” a change from HIGH to LOW is detected.
Note that this bit is cleared to “0” at reset.
Since A-D conversion interrupt and the INT3 interrupt share the
same vector, an interrupt source is selected by bit 7 of the inter-
rupt interval determination control register (address 021216).
(9) Timer 5 6 Interrupt
An interrupt is generated by an overflow of timer 5 or 6. Their
priorities are same, and can be switched by software.
(10) BRK Instruction Interrupt
This software interrupt has the least significant priority. It does
not have a corresponding interrupt enable bit, and it is not af-
fected by the interrupt disable flag I (non-maskable).
Fig. 12.3.1 Interrupt Control
Interrupt request bit
Interrupt enable bit
Interrupt disable flag I
BRK instruction
Reset
Interrupt
request
相關PDF資料
PDF描述
M37280MK-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP64
M37280MKH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP64
M37280MFH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP64
M37281MFH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37281MAH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
相關代理商/技術參數
參數描述
M37280MK 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37280MK-103SP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37280MK-104SP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37280MK-114SP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37280MK-206SP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*