參數資料
型號: LTC4000IUFD#TRPBF
廠商: LINEAR TECHNOLOGY CORP
元件分類: 電源管理
英文描述: 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PQCC28
封裝: 4 X 5 MM, LEAD FREE, PLASTIC, MO-220WXXX-X, QFN-28
文件頁數: 21/40頁
文件大?。?/td> 428K
代理商: LTC4000IUFD#TRPBF
LTC4000
28
4000f
applicaTions inForMaTion
The charge termination time is set at 2.9 hours accord-
ing to the following formula:
CTMR(nF) = tTERMINATE(h) 34.6 = 2.9 34.6 = 100nF
The C/X current termination level is programmed at 1A
according to the following formula:
RCX =
1A 5mΩ
(
)+ 0.5mV
0.25A
≈ 22.1kΩ
Note that in this particular solution, the timer termina-
tion is selected since a capacitor connects to the TMR
pin. Therefore, this C/X current termination level only
applies to the CHRG indicator pin.
The output voltage regulation level is set at 12V accord-
ing to the following formula:
ROFB1 =
12
1.193
1
127kΩ ≈ 1.15MΩ
Theinstant-onvoltagelevelisconsequentlysetat9.79V
according to the following formula:
VINST_ON =
1150kΩ + 127kΩ
127kΩ
0.974V = 9.79V
The worst-case power dissipation during instant-on
operation can be calculated as follows:
During trickle charging:
PTRKL = 0.86 VFLOAT – VBAT
[
] ICLIM_TRKL
= 0.86 10.8
[
] 1A
= 9.3W
And beyond trickle charging:
PINST_ON = 0.86 VFLOAT – VBAT
[
] ICLIM
= 0.86 10.8 – 7.33
[
] 10A
= 19.3W
Therefore, depending on the layout and heat sink avail-
able to the charging PMOS, the suggested PMOS over
temperature detection circuit included in Figure 7 may
needtobeincluded.Forthecompleteapplicationcircuit,
please refer to Figure 25.
The range of valid temperature for charging is set at
–1.5°C to 41.5°C by picking a 10k Vishay Curve 2 NTC
thermistor that is thermally coupled to the battery, and
connecting this in series with a regular 10k resistor to
the BIAS pin.
For compensation, the procedure described in the
empirical loop compensation section is followed. As
recommended, first a 1F CC and 10k RC is used, which
sets all the loops to be stable. For an example of typical
transient responses, the charge current regulation loop
when VOFB is regulated to VOUT(INST_ON) is used here.
Figure 15 shows the recommended setup to inject a
DC-coupled charge current variation into this particular
loop. The input to the CL pin is a square wave at 70Hz
with the low level set at 120mV and the high level set
at 130mV, corresponding to a 1.2A and 1.3A charge
current (100mA charge current step). Therefore, in this
particular example the trickle charge current regulation
stability is examined. Note that the nominal trickle
charge current in this example is programmed at 1.25A
(RCL = 24.9kΩ).
Figure 15. Charge Current Regulation Loop Compensation Setup
LTC4000
10k
1k
4000 F15
0.015F
SQUARE WAVE
GENERATOR
f = 60Hz
IBMON
CL
1500pF
B
A
相關PDF資料
PDF描述
LTC4075XEDD 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10
LTC4075XEDD#PBF 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO10
LTC4095EDC#TR 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
LTC4095EDC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
LTC4095EDC#TRM 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8
相關代理商/技術參數
參數描述
LTC4001 制造商:LINER 制造商全稱:Linear Technology 功能描述:2A Synchronous Buck Li-Ion Charger
LTC4001-1 制造商:LINER 制造商全稱:Linear Technology 功能描述:2A Synchronous Buck Li-Ion Charger
LTC4001EUF 制造商:Linear Technology 功能描述:Battery Charger Li-Ion/Li-Pol 2000mA 4.2V 16-Pin QFN EP
LTC4001EUF#PBF 功能描述:IC CHARGER LI-ION BUCK 16-QFN RoHS:是 類別:集成電路 (IC) >> PMIC - 電池管理 系列:- 其它有關文件:STC3100 View All Specifications 特色產品:STC3100 - Battery Monitor IC 標準包裝:4,000 系列:- 功能:燃料,電量檢測計/監控器 電池化學:鋰離子(Li-Ion) 電源電壓:2.7 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-TSSOP,8-MSOP(0.118",3.00mm 寬) 供應商設備封裝:8-MiniSO 包裝:帶卷 (TR) 其它名稱:497-10526-2
LTC4001EUF#TRPBF 功能描述:IC CHARGER LI-ION BUCK 16-QFN RoHS:是 類別:集成電路 (IC) >> PMIC - 電池管理 系列:- 標準包裝:61 系列:- 功能:電源管理 電池化學:鋰離子(Li-Ion)、鋰聚合物(Li-Pol) 電源電壓:4.35 V ~ 5.5 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:22-WFDFN 裸露焊盤 供應商設備封裝:22-DFN(6x3)裸露焊盤 包裝:管件