![](http://datasheet.mmic.net.cn/70000/LSP4054YLAD_datasheet_2356973/LSP4054YLAD_1.png)
Liteon Semiconductor Corporation
LSP4054
Standalone Linear Li-ion Battery Charger with Thermal Regulation
Rev1.1
1/17
APPLICATIONS
Cellular phones, PDAs
Bluetooth applications
Charging docks and Cradles
MP3 players
PIN CONFIGURATION
(Top View)
SOT23-5L
SOT89-5L
PIN DESCRIPTION
Pin Number
Pin Name
Pin Function
1
CHRG
Open-drain charge status output
2
GND
Ground
3
BAT
Charge current output
4
Vcc
Positive input supply voltage
5
PROG
Charge current program, Charge current monitor and shutdown pin
GENERAL DESCRIPTION
The
LSP4054
is
a
complete
constant-current/
constant-voltage linear charger for cell lithium-ion
batteries. Its Thin SOT23-5L package and low external
component count make the LSP4054 ideally suited for
portable applications. Furthermore, the LSP4054 is
specifically designed to work within USB power
specifications.
No external sense resistor is needed, and no blocking
diode is required due to the internal MOSFET architecture.
Thermal feedback regulators the charge current to limit the
die temperature during high power operation or high
ambient temperature. The charge voltage is fixed at 4.2V,
and the charge current can be programmed externally with
a single resistor. The LSP4054 automatically terminates
the charge cycle when the charge current drops to 1/10
th
the programmed value after the final float voltage is
reached.
When the input supply (wall adapter or USB supply) is
removed, the LSP4054 automatically enters a low current
state, dropping the battery drain current to less than 2uA.
The LSP4054 can be put into shutdown mode, reducing
the supply current to 25uA.
Other
features
include
charge
current
monitor,
undervoltage lockout, automatic recharge and a status pin
to indicate charge termination and the presence of an input
voltage.
FEATURES
Programmable charge current up to 800mA
No MOSFET, sense resistor or blocking diode
required
Complete linear charger in thin SOT package for
single cell lithium–ion batteries
Constant-current/constant-voltage operation with
thermal regulation to maximize charge rate
without risk of overheating
Charges single cell Li-ion batteries directly from
USB port
Preset 4.2V charge voltage with ±1% accuracy
Charge current monitor output for gas gauging
Automatic recharge
Charge status output pin
C/10 charge termination
25uA supply current in shutdown
2.9V trickle charge threshold
Soft-start limits inrush current
Available in SOT23-5L and SOT89 packages
TYPICAL APPLICATIONS CIRCUITS
600mA single cell Li-ion charger