參數資料
型號: LPC2109FBD64
廠商: NXP Semiconductors N.V.
元件分類: 數學處理器
英文描述: Single-chip 16-32-bit microcontrollers; 64-128-256 kB ISP-IAP flash with 10-bit ADC and CAN
封裝: LPC2109FBD64/01<SOT314|<<<1<Always Pb-free,;LPC2119FBD64/01<SOT314-2 (LQFP64)|<<http://www.nxp.com/packages/SOT314-2.html<1<Always Pb-free,;LPC2129FBD64/01<SOT314-2
文件頁數: 15/46頁
文件大?。?/td> 291K
代理商: LPC2109FBD64
LPC2109_2119_2129
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 7 — 14 June 2011
15 of 46
NXP Semiconductors
LPC2109/2119/2129
Single-chip 16/32-bit microcontrollers
6.8 10-bit ADC
The LPC2109/2119/2129 each contain a single 10-bit successive approximation ADC with
four multiplexed channels.
6.8.1
Features
Measurement range of 0 V to 3 V.
Capable of performing more than 400000 10-bit samples per second.
Burst conversion mode for single or multiple inputs.
Optional conversion on transition on input pin or Timer Match signal.
6.8.2
ADC features available in LPC2109/2119/2129/01 only
Every analog input has a dedicated result register to reduce interrupt overhead.
Every analog input can generate an interrupt once the conversion is completed.
The ADC pads are 5 V tolerant when configured for digital I/O function(s).
6.9 CAN controllers and acceptance filter
The LPC2119 and LPC2129 each contain two CAN controllers, while the LPC2109 has
one CAN controller. The CAN is a serial communications protocol which efficiently
supports distributed real-time control with a very high level of security. Its domain of
application ranges from high-speed networks to low-cost multiplex wiring.
6.9.1
Features
Data rates up to 1 Mbit/s on each bus.
32-bit register and RAM access.
Compatible with CAN specification 2.0 B, ISO 11898-1.
Global Acceptance Filter recognizes 11-bit and 29-bit Rx identifiers for all CAN buses.
Acceptance Filter can provide FullCAN-style automatic reception for selected
Standard identifiers.
6.10 UARTs
The LPC2109/2119/2129 each contain two UARTs. In addition to standard transmit and
receive data lines, the UART1 also provides a full modem control handshake interface.
6.10.1
Features
16 B Receive and Transmit FIFOs.
Register locations conform to 16C550 industry standard.
Receiver FIFO trigger points at 1 B, 4 B, 8 B, and 14 B.
Built-in fractional baud rate generator covering wide range of baud rates without a
need for external crystals of particular values.
Transmission FIFO control enables implementation of software (XON/XOFF) flow
control on both UARTs.
相關PDF資料
PDF描述
LPC2119FBD64 Single-chip 16-32-bit microcontrollers; 64-128-256 kB ISP-IAP flash with 10-bit ADC and CAN
LPC2129FBD64 Single-chip 16-32-bit microcontrollers; 64-128-256 kB ISP-IAP flash with 10-bit ADC and CAN
LPC2114FBD64 Single-chip 16-32-bit microcontrollers; 128-256 kB ISP-IAP flash with 10-bit ADC
LPC2124FBD64 Single-chip 16-32-bit microcontrollers; 128-256 kB ISP-IAP flash with 10-bit ADC
LPC2131FBD64 Single-chip 16-32-bit microcontrollers; 32-64-128-256-512 kB ISP-IAP flash with 10-bit ADC and DAC
相關代理商/技術參數
參數描述
LPC2109FBD64/00 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Single-chip 16/32-bit microcontrollers; 64/128/256 kB ISP/IAP flash with 10-bit ADC and CAN
LPC2109FBD64/00,15 制造商:NXP Semiconductors 功能描述:
LPC2109FBD64/00,151 制造商:NXP Semiconductors 功能描述:
LPC2109FBD64/01 制造商:NXP Semiconductors 功能描述:MCU, 16BIT/32BIT, 60MHZ, LQFP-64 制造商:NXP Semiconductors 功能描述:MCU, 16BIT/32BIT, 60MHZ, LQFP-64, Controller Family/Series:LPC2100, Core Size:16bit / 32bit, No. of I/O's:46, Supply Voltage Min:1.65V, Supply Voltage Max:1.95V, Digital IC Case Style:LQFP, No. of Pins:64, Program Memory Size:64KB,
LPC2109FBD64/01,15 功能描述:ARM微控制器 - MCU ARM7 64KF/8KR/CAN RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 處理器系列:STM32F373xx 數據總線寬度:32 bit 最大時鐘頻率:72 MHz 程序存儲器大小:256 KB 數據 RAM 大小:32 KB 片上 ADC:Yes 工作電源電壓:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作溫度范圍:- 40 C to + 85 C 封裝 / 箱體:LQFP-48 安裝風格:SMD/SMT