參數資料
型號: LC865504B
廠商: Sanyo Electric Co.,Ltd.
英文描述: Octal Buffers/Drivers With 3-State Outputs 20-TSSOP -40 to 85
中文描述: 8位單片機微控制器片20/16/12/08/04K-Byte ROM和512字節RAM
文件頁數: 15/19頁
文件大小: 640K
代理商: LC865504B
LC863532A/28A/24A/20A/16A
No.6844-15/19
Recommended Oscillation Circuit and Sample Characteristics
The sample oscillation circuit characteristics in the table below is based on the following conditions:
Recommended circuit parameters are verified by an oscillator manufacturer using a Sanyo provided oscillation evaluation
board.
Sample characteristics are the result of the evaluation with the recommended circuit parameters connected externally.
Recommended oscillation circuit and sample characteristics (Ta = -10 to +70
°
C)
Frequency
Manufacturer
Oscillator
Recommended circuit
parameters
Oscillation
stabilizing
time
typ.
1.00S 1.50S
Notes
C1
18pF
C2
18pF
Rf
open 390k
Rd
Operating
supply voltage
range
max
32.768kHz
Seiko Epson
C-002RX
4.5 to 5.5V
Notes
The oscillation stabilizing time period is the time until the VCO oscillation for the internal system becomes stable
after the following conditions
.
(Refer to Figure 2.)
1. The VDD becomes higher than the minimum operating voltage after the power is supplied.
2. The HOLD mode is released.
The sample oscillation circuit characteristics may differ applications. For further assistance, please contact with oscillator
manufacturer with the following notes in your mind.
Since the oscillation frequency precision is affected by wiring capacity of the application board, etc., adjust the
oscillation frequency on the production board.
The above oscillation frequency and the operating supply voltage range are based on the operating temperature of -10
°
C
to +70
°
C. For the use with the temperature outside of the range herein, or in the applications requiring high reliability
such as car products, please consult with oscillator manufacturer.
When using the oscillator which is not shown in the sample oscillation circuit characteristics, please consult with Sanyo
sales personnel.
Since the oscillation circuit characteristics are affected by the noise or wiring capacity because the circuit is designed with low
gain in order to reduce the power dissipation, refer to the following notices.
The distance between the clock I/O terminal (XT1 terminal XT2 terminal) and external parts should be as short as
possible.
The capacitors’ VSS should be allocated close to the microcontroller’s GND terminal and be away from other GND.
The signal lines with rapid state changes or with large current should be allocated away from the oscillation circuit.
Figure 1 Recommended oscillation circuit.
C1
Rd
C2
X’tal
XT2
XT1
Rf
相關PDF資料
PDF描述
LC865516A 8-Bit Single Chip Microcontroller with On-Chip 16K-Byte ROM and 512-Byte RAM(8位單片微控制器(帶片上16K字節ROM和512字節RAM))
LC865608 Octal Buffers/Drivers With 3-State Outputs 20-PDIP -40 to 85
LC865612A 8-Bit Single Chip Microcontroller
LC865624A 8-Bit Single Chip Microcontroller with On-Chip 24K-Byte ROM and 640-Byte RAM(8位單片微控制器(帶片上24K字節ROM和640字節RAM))
LC866008A 8-bit single chip microcomputer
相關代理商/技術參數
參數描述
LC865508 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:8-Bit Single Chip Microcontroller with the One-Time Programmable PROM
LC865508B 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:8-Bit Single Chip Microcontroller with On-Chip 20/16/12/08/04K-Byte ROM and 512-Byte RAM
LC865512 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:8-Bit Single Chip Microcontroller
LC865512B 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:8-Bit Single Chip Microcontroller with On-Chip 20/16/12/08/04K-Byte ROM and 512-Byte RAM
LC865516 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:8-Bit Single Chip Microcontroller with the One-Time Programmable PROM