參數資料
型號： LC78626
廠商： Sanyo Electric Co.,Ltd.
元件分類： 數字信號處理
英文描述： 16-bit fixed point DSP with Flash
中文描述： 具有閃存的 16 位定點 DSP
文件頁數： 20/32頁
文件大?。?/td> 475K
代理商： LC78626
*
When the desired number of tracks is entered as a binary number, the track check operation begins with the falling
edge of the RWC.
During the track check the TOFF pin becomes high and the tracking loop turns off, and thus there is the need to
provide a feed to the feed motor.
When the track check In/Out commands are entered, the WRQ signal changes from the subcode Q standby monitor
that it is during normal times to become the track check monitor. This signal becomes high when half of the number
of tracks have been checked, and becomes low when the check is complete. The microcontroller sees that the WRQ
signal has become low and determines that the check has been completed.
If the two-byte reset command is not entered, the track check operation begins again. In other words, if you wished to
advance 20,000 tracks, then a single 201 track check code would be sent and then when 100 cycles of the WRQ have
been counted, then there have been 20,000 track checks.
When the track check is performed, the brake command is used to lock the pickup to a track.
*
*
*
*
8
The Error Flag Output
Pin 43: EFLG, Pin 44: FSX
The FSX is the 7.35 kHz frame sync signal that is created by frequency dividing the crystal clock. For each frame, the
error correction status is output to EFLG. It is easy to tell the quality of the playback by the number of high pulses
that appear in the EFLG signal.
9
The Subcode P, Q and R to W Output Circuits
Pin 34: SBCK, Pin 35: SFSY/CONT4, Pin 36: PW/CONT5,
Pin 37: SBSY
PW is the subcode signal output pin. (Note: Pin 35 and Pin 36 are, respectively, a general I/O pin and an exclusively
shared pin, and the selection of the pin depends on commands from the micro controller. See Item 19 on page 24.) By
applying 8 clocks to SBCK within 136 μs of the falling edge of SFSY, it is possible to read all codes until P, Q, and R
to W. The signal that appears at the PW pin changes with the rising edge of SBCK. When no clock is applied to
SBCK, the “P” code is output to PW. SFSY is a signal that is output for each subcode frame, and the falling edge of
this signal indicates that the subcode symbol (P to W) output is in standby. The subcode data P is output at the falling
edge of this signal.
SBSY is a signal output for each subcode block. This signal becomes high during sync signals S0 and S1, and its
falling edge indicates the end of the subcode sync signal and the beginning of the data in subcode block (in EIAJ
format).
No. 5692-20/32
LC78626E
1 correction
2 correction
Correction
function
No errors
相關PDF資料
PDF描述
LC78626E 16-bit fixed point DSP with Flash
LC78628 16-bit fixed point DSP with Flash
LC78628E 16-bit fixed point DSP with Flash
LC78630 16-bit fixed point DSP with Flash
LC78630E 16-bit fixed point DSP with Flash
相關代理商/技術參數
參數描述
LC78626E 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:DSP for Compact Disk Players
LC78626KE 制造商:未知廠家 制造商全稱:未知廠家 功能描述:CD-Player Processor/Controller
LC78628 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:Compact Disc Player DSP with Built-in HDCD Decoder
LC78628E 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:Compact Disc Player DSP with Built-in HDCD Decoder
LC7863 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:DIGITAL SIGNAL PROCESSOR FOR COMPACT DISC PLAYERS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*