
CMOS LSI
Ordering number : EN5378
93096HA (OT) No. 5378-1/13
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
Single-Chip Microcontroller with PLL 
and LCD Driver
LC72322R, 72323R
Overview
The LC72322R and LC72323R are single-chip
microcontrollers for use in electronic tuning applications.
These ICs include on chip both LCD drivers and a PLL
circuit that can operate at up to 150 MHz. The LC72322R
and LC72323R feature that these ICs are reversed pin-
assignment versions of LC72322 and LC72323
respectively and have the equal functions and
specifications to theirs respectively.
Functions
 Stack: Eight levels
 Fast programmable divider
 General-purpose counters: HCTR for frequency
measurement and LCTR for frequency or period
measurement
 LCD driver for displays with up to 56 segments 
(1/2 duty, 1/2 bias)
 Program memory (ROM):4095 (8 KB) 16-bit digits: 
LC72322R
3071 (6 KB) 16-bit digits: 
LC72323R
 Data memory (RAM): 256 4-bit digits
 All instructions are single-word instructions
 Cycle time:
2.67 μs, 13.33 μs, or 40.00 μs (option)
 Unlock FF:
0.55 μs detection, 1.1 μs detection
 Timer FF:
1 ms, 5ms, 25ms, 125ms
 Input ports*: One dedicated key input port and one 
high-breakdown voltage port
 Output ports*:Two dedicated key output ports, one
high-breakdown voltage open-drain port
Two CMOS output ports (of which one 
can be switched to be used as LCD driver 
outputs)
Seven CMOS output ports (mask option 
switchable to use as LCD ports)
One switchable between input and output 
in four-bit units and one switchable 
between input and output in bit units
Note:  *  Each port consists of four bits.
 Program runaway can be detected and a special address
set (Programmable watchdog timer).
 Voltage detection type reset circuit
 One 6-bit A/D converter
 Two 8-bit D/A converters (PWM): LC72322R only
 One external interrupt
 Hold mode for RAM backup
 Sense FF for hot/cold startup determination
 PLL: 4.5 to 5.5 V
 CPU: 3.5 to 5.5 V
 RAM: 1.3 to 5.5 V
 LC72P321R as OTP used
 Package: QIP80DR
 I/O ports*:
Package Dimensions
unit: mm
3223-QFP80DR
This LSI can easily use CCB that is SANYO’s original bus format.
 CCB is a trademark of SANYO ELECTRIC CO., LTD.
CCB is SANYO’s original bus format and all the bus
addresses are controlled by SANYO.
SANYO: QIP80DR
[LC72322R, LC72323R]