參數資料
型號: LA7578N
廠商: Sanyo Electric Co.,Ltd.
英文描述: IF Signal Processing (Super PLL-II VIF + SIF) Circuit for TVs and VCRs(用于電視機/VCR應用的IF信號處理(超鎖相環II VIF+SIF)電路)
中文描述: 中頻信號處理(超鎖相環-Ⅱ資料表格應力強度因子)的電視和錄像機電路(用于電視機/錄像機應用的中頻信號處理(超鎖相環二資料表格強度因子)電路)
文件頁數: 13/18頁
文件大?。?/td> 237K
代理商: LA7578N
AFT characteristics
Freq
Fig. 19
AFT characteristics
Pins 11 and 12 (AFT coil)
Pins 11 and 12 are the AFT pins.
In the quadrature detection system, a signal that has been
phase-shifted 90 deg is generated by an external AFT tank, and
phase detection is done by the multiplier. The IF signal has the
band characteristics shown in Fig. (A) because of the SAW
filter. Accordingly, even if the band characteristics of the AFT
tank change, the AFT characteristics are extended in the low
band as shown in Fig. C, which makes misoperation more
likely. As a result, band restrictions are placed on the low band
frequencies as shown in Fig. D by inserting C2 in series with
the AFT tank. The ratio between C1 and C2 needed in order to
suppress misoperation should be about 5:1 (C1:C2). In this
case, insert either a resistor or an L in parallel with C2 so that
the DC balance of the AFT circuit is not disrupted.
(1) AFT DEFEAT
To implement AFT defeat, connect these pins to GND
through resistor R1. The resistance used in this case is 20
k
or less.
Carrier filter
Also serves to protect IC.
AFT loop time constant
Fig. 18
Pin 14 (AFT output)
This is the AFT output pin.
This pin controls AFT of the tuner. The AFT voltage is generated
by an external bleeder resistor. The AFT loop time constant is
determined by inserting a resistor (R3) and a capacitor as shown
in the diagram between this output pin and the AFT input pin of
the tuner. This resistor also serves to protect the IC.
When the system of the selected station is the PLL system or the
voltage synthesizer system, the variation of the no signal voltage
of the AFT output becomes a problem. In this type of case,
connecting a series resistor (R4) to the IC output as shown in Fig.
22 narrows the range over which AFT varies, making it possible
to reduce the variation of the no signal voltage of the AFT output.
Fig. 20
LA7578N
No.4952-13/18
相關PDF資料
PDF描述
LA7583 IF Signal Processing Circuit (A 2 C PLL VIF + SIF) for TVs and VCRs(用于電視機/VCR應用的IF信號處理(自動調整控制 鎖相環 VIF+SIF)電路)
LA7605M Monolithic Linear IC Video Signal Processor
LA76070 NTSC Color Television IC
LA76075 NTSC Color Television Sets
LA7615 Single-Chip NTSC Color TV IC
相關代理商/技術參數
參數描述
LA7583 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:IF Signal Processing Circuit (A2C PLL VIF + SIF) for TVs and VCRs
LA7590 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC
LA7600 制造商:未知廠家 制造商全稱:未知廠家 功能描述:
LA7601 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Consumer IC
LA7601W 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Consumer IC