參數資料
型號： KSZ8993M
廠商： Micrel Inc
文件頁數： 31/85頁
文件大小： 0K
描述： IC SWITCH 10/100 3PORT 128PQFP
標準包裝： 66
系列： *
類型： *
應用： *
安裝類型： 表面貼裝
封裝/外殼： 128-BFQFP
供應商設備封裝： 128-PQFP（14x20）
包裝： 托盤
產品目錄頁面： 1081 (CN2011-ZH PDF)
其它名稱： 576-1037
Micrel, Inc.
KS8993M/ML/MI
April 2005
37
M9999-041205
Port-Based Priority
With port based priority, each ingress port can be individually classified as a high priority receiving port. All
packets received at the high priority receiving port are marked as high priority, and will be sent to the high priority
transmit queue if the corresponding transmit queue is split. Bit 4 of registers 16, 32 and 48 is used to enable port
based priority for ports 1, 2 and 3, respectively. Optionally, the Px_PP strap-in pins can be used to enable this
feature.
802.1p-Based Priority
For 802.1p based priority, the KS8993M will examine the ingress (incoming) packets to determine whether they
are tagged. If tagged, the 3-bits priority field in the VLAN tag is retrieved and compared against the “priority base”
value, specified by register 2 bits [6:4]. The “priority base” value is programmable; its default value is 0x4.
The following figure illustrates how the 802.1p priority field is embedded in the 802.1Q VLAN tag.
Preamble
DA
TCI
86
6
2
length
LLC
Data
FCS
2
46-1500
4
1
Tagged Packet Type
(8100 for Ethernet)
802.1p
CF
I
VLAN ID
Bytes
Bits
16
3
12
802.1q VLAN Tag
2
SA
VPID
Figure 6. 802.1p Priority Field Format
If an ingress packet has an equal or higher priority value than the "priority base" value, the packet will be placed in
the high priority transmit queue if the corresponding transmit queue is split. 802.1p based priority is enabled by bit
5 of registers 16, 32 and 48 for ports 1, 2 and 3, respectively. Optionally, the Px_1PEN strap-in pins can be used
to enable this feature.
The KS8993M provides the option to insert or remove the priority tagged frame's header at each individual egress
port. This header, consisting of the 2 bytes VLAN Protocol ID (VPID) and the 2 bytes Tag Control Information field
(TCI), is also refer to as the 802.1Q VLAN Tag.
Tag Insertion is enabled by bit 2 of registers 16, 32 and 48 for ports 1, 2 and 3, respectively. Optionally, the
Px_TAGINS strap-in pins can be used to enable this feature. At the egress port, untagged packets are tagged
with the ingress port’s default tag. The default tags are programmed in register sets {19,20}, {35,36} and {51,52}
for ports 1, 2 and 3, respectively. The KS8993M will not add tags to already tagged packets.
Tag Removal is enabled by bit 1 of registers 16, 32 and 48 for ports 1, 2 and 3, respectively. Optionally, the
Px_TAGRM strap-in pins can be used to enable this feature. At the egress port, tagged packets will have their
802.1Q VLAN Tags removed. The KS8993M will not modify untagged packets.
The CRC is recalculated for both tag insertion and tag removal.
802.1p Priority Field Re-mapping is a QoS feature that allows the KS8993M to set the “User Priority Ceiling” at
any ingress port. If the ingress packet’s priority field has a higher priority value than the default tag’s priority field
of the ingress port, the packet’s priority field is replaced with the default tag’s priority field. The “User Priority
Ceiling” is enabled by bit 3 of registers 16, 32 and 48 for ports 1, 2 and 3, respectively.
DiffServ-Based Priority
DiffServ-based priority uses registers 96 to 103. More details are provided at the beginning of the Advanced
Control Registers section.
相關PDF資料
PDF描述
KSZ8995M IC SWITCH 10/100 5PORT 128PQFP
RSM40DTAT CONN EDGECARD 80POS R/A .156 SLD
LFEC6E-3QN208C IC FPGA 6.1KLUTS 147I/O 208-PQFP
LFEC6E-3Q208C IC FPGA 6.1KLUTS 147I/O 208-PQFP
RMM40DTAT CONN EDGECARD 80POS R/A .156 SLD
相關代理商/技術參數
參數描述
KSZ8993MA5 功能描述:IC SWITCH 10/100 W/TXRX 128PQFP RoHS:是 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA（27x27） 包裝:散裝
KSZ8993M-EVAL 功能描述:以太網開發工具 KSZ8993M Evaluation Board RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
KSZ8993MI 功能描述:以太網 IC 2+1 Port 10/100 Switch w/Tranceivers & Frame Buffers, 128-Ld PQFP (Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8993ML 功能描述:以太網 IC 2+1 Port 10/100 Switch w/Tranceivers & Frame Buffers, 128-Ld PQFP(Lead Free) RoHS:否 制造商:Micrel 產品:Ethernet Switches 收發器數量:2 數據速率:10 Mb/s, 100 Mb/s 電源電壓-最大:1.25 V, 3.45 V 電源電壓-最小:1.15 V, 3.15 V 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-64 封裝:Tray
KSZ8993ML-EVAL 功能描述:以太網開發工具 KSZ8993ML Evaluation Board RoHS:否 制造商:Micrel 產品:Evaluation Boards 類型:Ethernet Transceivers 工具用于評估:KSZ8873RLL 接口類型:RMII 工作電源電壓:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*