- 您現在的位置：買賣IC網 > PDF目錄384528 > ISL8560 (Intersil Corporation) DC/DC Power Switching Regulator PDF資料下載
參數資料
| 型號： | ISL8560 |
| 廠商： | Intersil Corporation |
| 元件分類： | 基準電壓源/電流源 |
| 英文描述： | DC/DC Power Switching Regulator |
| 中文描述： | DC/DC電源開關穩壓器 |
| 文件頁數： | 4/17頁 |
| 文件大?。?/td> | 1016K |
| 代理商： | ISL8560 |
4
FN9244.6
September 18, 2007
Pin Descriptions
LX (Pins 1, 2, 15, 16)
There are four output pins that must be connected together
externally in normal operation.
BOOT (Pin 3)
A capacitor is connected from this pin to the output pin. An
internal 10V supply and an internal schottky diode provide
the high side voltage to drive the gate of the output DMOS
device.
EN (Pin 4)
The EN input will disable the part and shut-down all function
when it is held high or left OPEN. The EN current will be
10μA typical. An internal pull-up resistor will hold the pin
high. When EN = Low, the part is enabled. Connect to GND
for auto start-up.
VCC5 (Pin 5)
VCC5 is the +5.0V output pin which provides an output of an
internal supply for supply filtering purposes. A 1μF capacitor
should be connected from this pin to GND. Internal VDD
supply is set at 5.0V (not planned that the user would use
this supply).
SYNC (Pin 6)
This pin provides a digital input pin to synchronize the
internal oscillator to an external signal. When the sync
function is not used, this pin can be left open or tied to GND.
If the sync function is used, the RTCT timing must be set to a
frequency lower than the sync input frequency. The
termination of the ramp is synchronized with the rising edge
of the sync input signal. There are no duty cycle restrictions
on the input sync signal. Input thresholds are TTL
compatible.
RTCT (Pin 7)
A resistor to VIN and a capacitor to GND determine the
frequency of the saw-tooth oscillator. Resistor range,
R = 20k to 100k. Capacitor range, C = 470pF to 1.2nF. The
oscillator amplitude will vary from approximately 0.9V to 10V
as V
IN
changes from 8.5V to 60V to maintain constant
frequency and provide feed forward. The oscillator will have
a fixed off time, which will establish the maximum on time for
the regulator. This off time will be <200ns. The maximum
duty cycle for a 500kHz system will therefore be
approximately 90% as the frequency of the maximum duty
cycle will increase (95% for 250kHz system). The minimum
duty cycle is zero.
SGND (Pin 8)
The SGND terminal of the ISL8560 provides the return path
for the control and monitor portions of the IC.
FB (Pin 9)
This is the feedback pin. The feedback ratio is set by an
external resistor divider connected to the load.
COMP (Pin 10)
This pin is connected to the output of the Error Amplifier and
is used to compensate the loop. The Error Amplifier is a GM
amplifier.
REF (Pin 11)
1.20V reference output. Bypass to GND with 0.01μF
capacitor.
PGOOD (Pin 12)
This pin is an open drain output that is turned on when the
feedback voltage is more than ±10% from the reference
voltage, indicating that the output is not within 10% of set
point.
PGND (Pin 13)
This pin is used as the ground connection of the power train.
SS (Pin 14)
A capacitor is connected from this pin to GND to determine
the soft-start timing. The soft-start pin internal charging
current is 10μA.
VIN (Pins 17, 18, 19, 20)
The input supply for the PWM regulator power stage.
Connected to DRAIN of the high side MOSFET.
ISL8560
相關PDF資料 |
PDF描述 |
|---|---|
| ISL8601 | Single-Phase, PMBus-Enabled PWM Controller with Integrated FET Drivers |
| ISL88031 | Quintuple Voltage Monitor |
| ISL88031IU8EAZ | Quintuple Voltage Monitor |
| ISL88031IU8ECZ | Quintuple Voltage Monitor |
| ISL88031IU8HAZ | Quintuple Voltage Monitor |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ISL8560EVAL2Z | 功能描述:EVALUATION BOARD FOR ISL8560 RoHS:是 類別:編程器，開發系統 >> 評估板 - DC/DC 與 AC/DC（離線）SMPS 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:True Shutdown™ 主要目的:DC/DC，步升 輸出及類型:1，非隔離 功率 - 輸出:- 輸出電壓:- 電流 - 輸出:1A 輸入電壓:2.5 V ~ 5.5 V 穩壓器拓?fù)浣Y(jié)構:升壓 頻率 - 開關:3MHz 板類型:完全填充 已供物品:板 已用 IC / 零件:MAX8969 |
| ISL8560IRZ | 功能描述:IC REG BUCK SYNC ADJ 2A 20QFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 開關穩壓器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 類型:降壓（降壓） 輸出類型:兩者兼有 輸出數:1 輸出電壓:5V，1 V ~ 10 V 輸入電壓:3.5 V ~ 28 V PWM 型:電流模式 頻率 - 開關:220kHz ~ 1MHz 電流 - 輸出:600mA 同步整流器:無 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:16-SSOP（0.154"，3.90mm 寬） 包裝:帶卷 (TR) 供應商設備封裝:16-QSOP |
| ISL8560IRZ-T | 功能描述:IC REG BUCK SYNC ADJ 2A 20QFN RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - DC DC 開關穩壓器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 類型:降壓（降壓） 輸出類型:兩者兼有 輸出數:1 輸出電壓:5V，1 V ~ 10 V 輸入電壓:3.5 V ~ 28 V PWM 型:電流模式 頻率 - 開關:220kHz ~ 1MHz 電流 - 輸出:600mA 同步整流器:無 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:16-SSOP（0.154"，3.90mm 寬） 包裝:帶卷 (TR) 供應商設備封裝:16-QSOP |
| ISL8560MREP | 制造商:Intersil Corporation 功能描述:V62/08608-01XB, -55 TO 125C VID VERSION OF THE ISL8560, 20LD - Rail/Tube |
| ISL8560M-REP | 制造商:Intersil Corporation 功能描述:CONV DC-DC SGL-OUT STEP DOWN 20QFN EP - Rail/Tube |
發布緊急采購，3分鐘左右您將得到回復。