參數資料
型號: ISL5216KI-1Z
廠商: INTERSIL CORP
元件分類: 無繩電話/電話
英文描述: Four-Channel Programmable Digital DownConverter
中文描述: TELECOM, CELLULAR, BASEBAND CIRCUIT, PBGA196
封裝: 15 X 15 MM, 1 MM PITCH, ROHS COMPLIANT, PLASTIC, BGA-196
文件頁數: 35/65頁
文件大小: 1076K
代理商: ISL5216KI-1Z
35
July 8, 2005
6:4
De-multiplex control. These control bits are provided to select a channel from a group of multiplexed channels. Up to eight multiplexed
data streams can be demultiplexed. These control bits select how many clocks after the ENIx signal to wait before taking the input
sample. ENIx should be asserted for one clock period and aligned with the first channel of the multiplexed data set. For example, if
four streams are multiplexed at half the clock rate, ENIx would align with the first clock period of the first stream, the second would
start two clocks later, the next four clocks after ENIx, etc. The samples are aligned with ENIx (zero delay) at the input of the
NCO/Mixer/CIC stage at the next ENIx.
000
Zero delay
111
All values from 0 through 7 are valid.
Seven clock periods of delay.
3
Interpolated/Gated Mode Select:
0
Gated. The carrier NCO and CIC are updated once per clock when ENIx is asserted.
1
Interpolated. The CIC is updated every clock. The carrier NCO is updated once per clock when ENIx is asserted. The
input is zeroed when ENIx is high.
2
Enable COF/COFSYNC inputs. When set, this bit enables two bits from the D(15:0) input data bus to be used as a carrier offset
frequency input.
1
Enable SOF/SOFSYNC inputs. When set, this bit enables two bits from the D(15:0) input data bus to be used as a resampler offset
frequency input.
0
Enable PN. When set, A PN code, weighted by the gain in location *001, is added to the input samples at the output of the mixer.
TABLE 4. CHANNEL INPUT SELECT/FORMAT REGISTER (IWA = *000h) (Continued)
P(31:0)
FUNCTION
TABLE 5. FLOATING POINT MODE DETAILS (IWA = *000h, BITS 17, 16, 8 and 7)
BIT 17
BIT 16
BIT 8
BIT 7
MANTISSA / EXP
EXPONENT RANGE (dB)
PIN ASSIGNMENTS:
MANTISSA BITS / EXPONENT BITS
0
X
0
0
11 to 13 / 3
30
15:5 (4 or 3) (Note 19) / 2:0
0
X
0
1
12 to 13 / 3
24
15:4 (3) / 2:0
0
X
1
0
13 / 3
18
15:3 / 2:0
0
X
1
1
14 / 2
18 maximum (Note 20)
15:2 / 1:0
1
0
0
0
11 / 3
42 maximum
15:5 / (2 logical-OR m1), 1, 0
1
0
0
1
12 / 3
42 maximum
15:4 / (2 logical-OR m1), 1, 0
1
0
1
0
13 / 3
42 maximum
15:3 / (2 logical-OR m1), 1, 0
1
0
1
1
14 / 3
42 maximum
15:2 / m1, 1, 0
1
1
0
0
15 / 2
18 maximum
15:1 / m1, 0
1
1
0
1
16 / 1
6 maximum
15:0 / m1
1
1
1
X
INVALID
INVALID
INVALID
NOTES:
19. Bits in parentheses are used as the shift gain allows.
20. Modes with “maximum” listed in exponent range use the CIC’s barrel shifter for gain, decreasing allowable CIC decimation. Maximum exponent
range may be limited, if desired, to allow for larger CIC decimation.
TABLE 6. PN GAIN REGISTER (IWA = *001h)
P(31:0)
FUNCTION
31:16
Reserved, set to all 0’s.
15:0
PN generator gain register. This input is provided to reduce the sensitivity of the receiver. A PN code, weighted by the value in this
location, is added to the data at the output of the mixer. Adding noise has the effect of increasing the receiver noise figure. One reason
to do this would be to decrease the basestation cell size in small steps. This method is very accurate and repeatable and can be
done on a FDM channel by channel basis. It does, however, reduce the overall dynamic range. An alternate way is to add attenuation
at the RF and adjust the whole range upward. This does not reduce the overall range but only shift it, with the shift being done on all
channels simultaneously.
ISL5216
相關PDF資料
PDF描述
ISL5216KIZ Four-Channel Programmable Digital DownConverter
ISL5216KI-1 Four-Channel Programmable Digital DownConverter
ISL5216KI Four-Channel Programmable Digital DownConverter
ISL5216 Four-Channel Programmable Digital DownConverter
ISL5217EVAL1 Quad Programmable Up Converter
相關代理商/技術參數
參數描述
ISL5216KIZ 功能描述:上下轉換器 W/ANNEAL QD DIGTL DWNCNVRTR IND TEMP RoHS:否 制造商:Texas Instruments 產品:Down Converters 射頻:52 MHz to 78 MHz 中頻:300 MHz LO頻率: 功率增益: P1dB: 工作電源電壓:1.8 V, 3.3 V 工作電源電流:120 mA 最大功率耗散:1 W 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PQFP-128
ISL5217 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Quad Programmable Up Converter
ISL5217_05 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:Quad Programmable Up Converter
ISL5217EVAL1 功能描述:EVALUATION BOARD FOR ISL5217KI RoHS:是 類別:RF/IF 和 RFID >> RF 評估和開發套件,板 系列:- 標準包裝:1 系列:- 類型:GPS 接收器 頻率:1575MHz 適用于相關產品:- 已供物品:模塊 其它名稱:SER3796
ISL5217KI 功能描述:上下轉換器 196BGA,-40+85C PROGRAMMABLE QUAD UP CONVERTER RoHS:否 制造商:Texas Instruments 產品:Down Converters 射頻:52 MHz to 78 MHz 中頻:300 MHz LO頻率: 功率增益: P1dB: 工作電源電壓:1.8 V, 3.3 V 工作電源電流:120 mA 最大功率耗散:1 W 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PQFP-128