參數資料
型號： ISD2340
廠商： WINBOND ELECTRONICS CORP
英文描述： SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
中文描述： 單芯片，多消息，語音記錄/播放設備32 - ，40 - ，48 - ，和64秒時間間隔
文件頁數： 12/42頁
文件大小： 1356K
代理商： ISD2340
ISD2532/40/48/64
7.2.1. Operational Modes Description
The Operational Modes can be used in conjunction with a microcontroller, or they can be hardwired to
provide the desired system operation.
M0 – Message Cueing
Message Cueing allows the user to skip through messages, without knowing the actual physical
addresses of each message. Each
CE
LOW pulse causes the internal address pointer to skip to the
next message. This mode is used for playback only, and is typically used with the M4 Operational
Mode.
M1 – Delete
EOM
Markers
The M1 Operational Mode allows sequentially recorded messages to be combined into a single
message with only one
EOM
marker set at the end of the final message. When this Operational
Mode is configured, messages recorded sequentially are played back as one continuous message.
M2 – Unused
When Operational Modes are selected, the M2 pin should be LOW.
M3 – Message Looping
The M3 Operational Mode allows for the automatic, continuously repeated playback of the message
located at the beginning of the address space. A message can completely fill the ISD2500 device and
will loop from beginning to end without
OVF
going LOW.
M4 – Consecutive Addressing
During normal operation, the address pointer will reset when a message is played through an
EOM
marker. The M4 Operational Mode inhibits the address pointer reset on
EOM
, allowing messages to
be played back consecutively.
M5 -
CE
-Level Activated
The default mode for ISD2500 devices is for
CE
to be edge-activated on playback and level-
activated on record. The M5 Operational Mode causes the
CE
pin to be interpreted as level-
activated as opposed to edge-activated during playback. This is especially useful for terminating
playback operations using the
CE
signal. In this mode,
CE
LOW begins a playback cycle, at the
beginning of the device memory. The playback cycle continues as long as
CE
is held LOW. When
CE
goes HIGH, playback will immediately end. A new
CE
LOW will restart the message from the
beginning unless M4 is also HIGH.
- 12 -
相關PDF資料
PDF描述
ISD2540E SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
ISD2540P SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
ISD2540S SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
ISD2540X SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
ISD2548E SINGLE-CHIP, MULTIPLE-MESSAGES, VOICE RECORD/PLAYBACK DEVICE 32-, 40-, 48-, AND 64-SECOND DURATION
相關代理商/技術參數
參數描述
ISD2-34-D 制造商:Samtec Inc 功能描述:2MM DISCRETE WIRE INSULATOR - Bulk
ISD2351 功能描述:LED 顯示器和配件 5x7 Yellow 0.2", 4-CHARACTER RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube
ISD2352 功能描述:LED 顯示器和配件 5x7 Super Red 0.2", 4-CHARACTER RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube
ISD2353 功能描述:LED 顯示器和配件 5x7 Hi-Eff Green 0.2", 4-CHARACTER RoHS:否 制造商:Avago Technologies 顯示器類型:7 Segment 數位數量:2 字符大小:7.8 mm x 14.22 mm 照明顏色:Red 波長:628 nm 共用管腳:Common Anode 工作電壓:2.05 V 工作電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 35 C 封裝:Tube
ISD2353-29 制造商:OSRAM 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*