參數資料
型號: IDT82V2616BBG
廠商: IDT, Integrated Device Technology Inc
文件頁數: 43/99頁
文件大?。?/td> 0K
描述: IC INVERSE MUX 16CH ATM 272-PBGA
標準包裝: 1
應用: 無線
接口: Utopia
電源電壓: 2.97 V ~ 3.63 V
封裝/外殼: 260-BGA
供應商設備封裝: 260-PBGA(19x19)
包裝: 托盤
安裝類型: 表面貼裝
其它名稱: 82V2616BBG
PROGRAMMING INFORMATION for IMAOS16
48
December 4, 2006
IDT82V2616
Inverse Multiplexing for ATM
Table-28 ConfigUNILink Command (Encoding: 0DH)
Command Parameters
Byte Sequence
Parameter Name
Default
Description
1
Channel ID
NA
0~15
The internally used channel for this UNI link. Each Channel ID is unique and should not be equal to any
Group ID that has been assigned. It is recommended that Channel ID be used from 15 down to 0. As a
Group ID is from 0 to 7, it is better for a Channel ID to be from 8 to 15 unless all the values from 8 to 15
are taken.
2
Link physical #
NA
0~15
The physical link to be used in UNI mode.
Note: If the value exceeds 15, the performance cannot be guaranteed.
3
Tx Utopia Port
1FH
0~30
The Utopia port address for data transmit. Port 31 is reserved and should not be used.
Note: The upper 3 bits are Don’t Care.
4
Rx Utopia Port
1FH
0~30
The Utopia port address for data receive. Port 31 is reserved and should not be used.
Note: The upper 3 bits are Don’t Care.
5
link line interface
Work Mode
0FH
Mode0~mode15
Line interface Work Mode for this link.
Note: If the value exceeds 15, IMAOS will work improperly.
6
link line interface
clock
0H
0: Common Clock Mode;
1: Independent Clock Mode
Line interface clock input mode. The line interface mode7~mode10 and mode14~mode15 cannot be
used in Independent Clock Mode.
Note: IMAOS does not check this value. Value exceeding 1 will cause wrong configuration.
Command Reply
Byte Sequence
Reply Name
Description
1
Ack
0: OK;
1: The link is busy or Channel ID is over 15;
Others: Internal error. The chip should be reset.
123456
Channel ID
Link physical #
Tx Utopia Port
Rx Utopia Port
link line interface
Work Mode
link line interface
clock
1
Ack
相關PDF資料
PDF描述
IDT88K8483BRI IC SPI-4 EXCHANGE 3PORT 672-BGA
IDT88P8341BHI IC SPI3-SPI4 EXCHANGE 820-PBGA
IDT88P8342BHI IC SPI3-SPI4 EXCHANGE 820-PBGA
IDT88P8344BHI IC SPI3-SPI4 EXCHANGE 820-PBGA
IDT89H24NT24G2ZBHLG IC PCI SW 24LANE 24PORT 324BGA
相關代理商/技術參數
參數描述
IDT82V3001A 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3001A_08 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3001APV 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3001APVG 功能描述:IC PLL WAN W/SGL REF INP 56SSOP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:1 系列:- 類型:時鐘/頻率發生器,多路復用器 PLL:是 主要目的:存儲器,RDRAM 輸入:晶體 輸出:LVCMOS 電路數:1 比率 - 輸入:輸出:1:2 差分 - 輸入:輸出:無/是 頻率 - 最大:400MHz 電源電壓:3 V ~ 3.6 V 工作溫度:0°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:16-TSSOP(0.173",4.40mm 寬) 供應商設備封裝:16-TSSOP 包裝:Digi-Reel® 其它名稱:296-6719-6
IDT82V3001APVG8 功能描述:IC PLL WAN W/SGL REF INP 56-SSOP RoHS:是 類別:集成電路 (IC) >> 時鐘/計時 - 專用 系列:- 標準包裝:1,500 系列:- 類型:時鐘緩沖器/驅動器 PLL:是 主要目的:- 輸入:- 輸出:- 電路數:- 比率 - 輸入:輸出:- 差分 - 輸入:輸出:- 頻率 - 最大:- 電源電壓:3.3V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:28-SSOP(0.209",5.30mm 寬) 供應商設備封裝:28-SSOP 包裝:帶卷 (TR) 其它名稱:93786AFT