- 您現在的位置：買賣IC網 > PDF目錄384403 > HFA3724 (HARRIS SEMICONDUCTOR) 400MHz Quadrature IF Modulator/Demodulator PDF資料下載
參數資料
| 型號： | HFA3724 |
| 廠商： | HARRIS SEMICONDUCTOR |
| 元件分類： | 衰減器 |
| 英文描述： | 400MHz Quadrature IF Modulator/Demodulator |
| 中文描述： | MODEM |
| 文件頁數： | 6/24頁 |
| 文件大?。?/td> | 186K |
| 代理商： | HFA3724 |
6
Pin Description
PIN
SYMBOL
DESCRIPTION
1
LIM1_BYP+
DC feedback pin for Limiter amplifier 1. Requires good decoupling and minimum wire length to a solid signal
ground.
2
LIM1_In+
Non inverting analog input of Limiter amplifier 1.
3
LIM1_In-
Inverting input of Limiter amplifier 1.
4
LIM1_BYP-
DC feedback pin for Limiter amplifier 1. Requires good decoupling and minimum wire length to a solid signal
ground.
5, 6,
7, 8
GND
Ground. Connect to a solid ground plane.
9
LPF_V
CC
Supply pin for the Low pass filter. Use high quality decoupling capacitors right at the pin.
10
2V REF
Stable 2V reference voltage output for external applications. Loading must be higher than 10k
. A bypass
capacitor of at least 0.1
μ
F is required.
11
LPF_BYP
Internal reference bypass pin. This is the common voltage (V
CM
) used for the LPF digital thresholds. Requires
0.1
μ
F decoupling capacitor.
12
LPF_TXI_In
Low pass filter in phase (I) channel transmit input. Conventional or attenuated direct coupling is required for digital
inputs. (Note 7)
13
LPF_TXQ_In
Low pass filter quadrature (Q) channel transmit input. Conventional or attenuated direct coupling is required for
digital inputs. (Note 7)
14
LPF_RXI_Out
Low pass filter in phase (I) channel receive output. Requires AC coupling. (Note 8)
15
LPF_RXQ_Out
Low pass filter quadrature (Q) channel receive output. Requires AC coupling. (Note 8)
16
LPF_Sel1
Digital control input pins. Selects four programed cut off frequencies for both receive and transmit channels. Tuning
speed from one cutoff to another is less than 1
μ
s.
SEL1
SEL0
Cutoff Frequency
SEL1
LO
LO
2.2MHz
HI
LO
HI
4.4MHz
HI
SEL0
LO
HI
Cutoff Frequency
8.8MHz
17.6MHz
17
LPF_Sel0
18
LPF_Tune1
These two pins are used to fine tune the Low pass filter cutoff frequency. A resistor connected between the two
pins (R
TUNE
) will fine tune both transmit and receive filters. Refer to the tuning equation in the LPF AC
specifications.
19
LPF_Tune0
20
GND
Ground. Connect to a solid ground plane.
21
LPF_RX_PE
Digital input control pin to enable the LPF receive mode of operation. Enable logic level is High.
22
LPF_TX_PE
Digital input control pin to enable the LPF transmit mode of operation. Enable logic level is High.
23
LPF_TXQ-
Negative output of the transmit Low pass filter, quadrature channel. AC coupling is required. Normally connects to
the inverting input of the quadrature Modulator (Mod_TXQ-), pin 40.
24
LPF_TXQ+
Positive output of the transmit Low pass filter, quadrature channel. AC coupling is required. Normally connects to
the non inverting input of the quadrature Modulator (Mod_TXQ+), pin 39.
25
LPF_TXI-
Negative output of the transmit Low pass filter, in phase channel. AC coupling is required. Normally connects to
the inverting input of the in phase Modulator (Mod_TXI-), pin 38.
26
LPF_TXI+
Positive output of the transmit Low pass filter, in phase channel. AC coupling is required. Normally connects to the
non inverting input of the in phase Modulator (Mod_TXI+), pin 37.
27
LPF_RXQ-
Low pass filter inverting input of the receive quadrature channel. AC coupling is required. This input is normally
coupled to the negative output of the quadrature demodulator (Mod_RXQ-), pin 36.
28
LPF_RXQ+
Low pass filter non inverting input of the receive quadrature channel. AC coupling is required. This input is normally
coupled to the positive output of the quadrature demodulator (Mod_RXQ+), pin 35.
29
LPF_RXI-
Low pass filter inverting input of the receive in phase channel. AC coupling is required. This input is normally
coupled to the negative output of the in phase demodulator (Mod_RXI-), pin 34.
30
LPF_RXI+
Low pass filter non inverting input of the receive in phase channel. AC coupling is required. This input is normally
coupled to the positive output of the in phase demodulator (Mod_RXI-), pin 33.
31, 32
GND
Ground. Connect to a solid ground plane.
HFA3724
相關PDF資料 |
PDF描述 |
|---|---|
| HFA3724IN | 400MHz Quadrature IF Modulator/Demodulator |
| HFA3724IN96 | 400MHz Quadrature IF Modulator/Demodulator |
| HFA3761 | 400MHz AGC and Quadrature IF Demodulator |
| HFA3761IN | 400MHz AGC and Quadrature IF Demodulator |
| HFA3763 | 288 MACROCELL 3.3 VOLT ISP CPLD |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HFA3724/3725IN WAF | 制造商:Harris Corporation 功能描述: |
| HFA3724/3726IN WAF | 制造商:Harris Corporation 功能描述: |
| HFA3724IN | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| HFA3724IN96 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| HFA3724INS2539 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
發布緊急采購，3分鐘左右您將得到回復。