參數資料
型號: GL860A-PNGXX
廠商: Genesys Logic, Inc.
英文描述: USB 2.0 UVC Camera Controller
中文描述: 紫外線相機的USB 2.0控制器
文件頁數: 34/42頁
文件大小: 1020K
代理商: GL860A-PNGXX
GL860A USB 2.0 UVC Camera Controller
2007 GenesysLogic, Inc. - All rights reserved.
Page 34
CHAPTER 5 FUNCTIONAL DESCRIPTION
5.1 Function Block
CCD/CMOS
Sensor I/F
TXFIFO
PIE
USB 2.0
PHY
CPU
8052
Figure 5.1 - Block Diagram
CCD Module/CMOS Sensor Interface
GL860A can link with popular CMOS sensor on market for PC camera application. GL860A can be
configured by different sensor requirement. If sensor is acting as master, GL860A can accept
HSYNC/VSYNC from sensor. If GL860A is configured as a master HSYNC/VSYNC will be provided
by GL860A to sensor. GL860A keep the most flexibility to fit most of the sensors. The detail of
configuration needs to refer to GL860A Application Note. For most sensors no matter of YUV format or
RGB format, they can be easily transferred image data to PC by GL860A.
TXFIFO
GL860A build in 6K byte internal buffer for USB high bandwidth application. This 6K internal buffer
can be used as transmitted buffer of isochronous pipe or bulk pipe. In USB specification, the highest
bandwidth of isochronous pipe is 24M byte/second, that can be easily derived to maximum frame rate
depending on configuration. For example, frame rate can be easily achieved to 30 frames per second if
image size is 640 x 480 if raw data output and sensor clock is 15M.
PIE
PIE handles the USB protocol defined in chapter 8 of
USB specification Revision 2.0
. It co-works with
CPU to play the role of the chip’s kernel. The main functions of PIE include the state machine of USB
protocol flow, CRC check, PID error check, and timeout check. Unlike USB1.1, bit stuffing/de-stuffing
is implemented in UTMI, not in PIE.
USB 2.0 PHY (UTMI )
UTMI handles the low level USB protocol and signaling. It’s designed based on the Intel’s UTMI
specification 1.01. The major functions of UTMI logic are to handle the data and clock recovery, NRZI
encoding/decoding, Bit stuffing /de-stuffing, supporting USB2.0 test modes, and serial/parallel conversion.
CPU
CPU is the micro-processor unit of GL860A. It is an 8-bit 8052 processor with 8K ROM and 256 bytes
RAM. It operates at 15Mhz clock to decode the USB command issued from host and then prepares the
data to respond to the host. In addition,
μ
C can handle GPIO (general purpose I/O) settings and
reading content of EEPROM to support high flexibility for customers of different configurations of chip.
These configurations include self/bus power mode setting, individual/gang mode setting, downstream
port number setting, device removable/non-removable setting, and PID/VID setting.
相關PDF資料
PDF描述
GL860 USB 2.0 PC Camera Controller
GL861 USB 2.0 Controller for PC-DTV Application
GL8ED5 1.9X3.9mm, Rectangle Type, Milky Diffusion, Dichromatic LED Lamps for Indicator
GL8ED5 HIGH-LUMINOSITY LED LAMP
GL8HD23 2.0X4.5mm, Rectangle Type, Colored Diffusion LED Lamps for Indicator
相關代理商/技術參數
參數描述
GL861 制造商:GENESYS 制造商全稱:GENESYS 功能描述:USB 2.0 Controller for PC-DTV Application
GL865DUA007T021 制造商:Telit 功能描述:
GL868DUA005T001 制造商:Telit 功能描述:only Russia
GL882 制造商:GTM 制造商全稱:GTM 功能描述:NPN EPITAXIAL PLANAR TRANSISTOR
GL8ED5 制造商:未知廠家 制造商全稱:未知廠家 功能描述:HIGH-LUMINOSITY LED LAMP