
GL842 USB 2.0 2-in-1 Scanner Controller
Genesys Logic Inc.—All rights reserved.
Page 7
CHAPTER 2 FEATURES
z
Highly integrated scanner controller chip. (2-in-1; Scanner Controller and USB 2.0 Interface)
z
USB 2.0 High Speed (480Mbit) compliance. (USB 2.0 High Speed logo certified)
z
Design for sheetfed, flatbed and transparency scanner.
z
12MHz Low frequency clock input required for better EMI.
z
Flexible 3.3V/5V power selection for pad I/O.
z
Adjustable working speed for different usage.
z
Fast operation speed. (0.3us/pixel. in 40MHz working clock)
z
It costs only 12 seconds for 600dpi A4 size color scanning.
z
Available sensor types: 600, 1200 and 2400dpi color CIS or CCD.
z
Support linear or stagger CCD, such as NEC, Toshiba or Sony CDD.
z
Support 48-Bits color (16-Bits gray level) scanning.
z
Support color, fine Gray, fast gray and fast B/W scan for CDD.
z
Support color, gray, true gray and B/W scan for CIS.
z
Support three scanning types: pixel by pixel (pixel rate), line by line (line rate) and RGB line by turns (line rate).
z
16 bits white/dark shading and 16-to-8 bits Gamma correction.
z
Support digital average and hardware deletion pixel function for speeding up low resolution scan.
z
Support hardware deletion type for DPI function (2400 to 1 DPI, 1 DPI decrement).
z
Programmable threshold level for B/W.
z
Exposure time is adjustable (1 pixel time increment step).
z
Scan width (scan area) control for horizontal line (1 pixel increment step).
z
Support 256K*16, 256K*16*2 and 1M*16 bits EDO-DRAM.
z
Support 5 acceleration/deceleration motor tables for detailed controllable high speed motor moving.
z
Support controllable bipolar motor in full, half and quarter steps moving.
z
Support controllable uni-polar motor in full and half steps moving.
z
Build-in PWM control phase for uni-polar motor.
z
Programmable dummy lines to resolve start/stop (discontinuous) problem.
z
Watch dog protect for lamp, motor and ASIC.
z
Lamp timeout (sleeping) control.
z
Support 16 GPIO pins and 2 GPO pins.
z
Output motor trigger signal under scanning for ADF.
z
2 Output ports for lamp (include flatbed and transparency with PWM) control.
z
Input port for home sensor.
z
Power on check status.
z
Support LED Blinking.
z
Support Back Scanning.