參數資料
型號: EV-ADF4157SD1Z
廠商: Analog Devices Inc
文件頁數: 13/24頁
文件大?。?/td> 0K
描述: BOARD EVAL FOR ADF4157
標準包裝: 1
主要目的: 計時,頻率合成器
嵌入式:
已用 IC / 零件: ADF4157
主要屬性: 單路分?jǐn)?shù)-N PLL
次要屬性: 6GHz
已供物品:
ADF4157
Data Sheet
Rev. D | Page 20 of 24
LOW FREQUENCY APPLICATIONS
The specification on the RF input is 0.5 GHz minimum; however,
RF frequencies lower than this can be used, providing the mini-
mum slew rate specification of 400 V/s is met. An appropriate
LVDS driver can be used to square up the RF signal before it is
fed back to the ADF4157 RF input. The FIN1001 from Fairchild
Semiconductor is one such LVDS driver.
FILTER DESIGN—ADIsimPLL
A filter design and analysis program is available to help the user
implement PLL design. Visit www.analog.com/pll for a free
download of the ADIsimPLL software. The software designs,
simulates, and analyzes the entire PLL frequency domain and
time domain response. Various passive and active filter architec-
tures are allowed.
OPERATING WITH WIDE LOOP FILTER
BANDWIDTHS
If a wide loop filter bandwidth is used (>60 kHz), fluctuations
in the phase noise profile may be noticed on channels that are
close to integer multiples of the PFD frequency. This is due to
operation of the charge pump close to the dead zone. To improve
the phase noise, a bleed current can be enabled to bias the charge
pump away from the dead zone. To enable this, set Bit DB[24:23]
in Register 4. Using this mode has the added advantage of
improving the integer boundary spurs by 4 dB to 5 dB. Note
that it is also safe to use this mode if the loop filter bandwidth
is <60 kHz.
PCB DESIGN GUIDELINES FOR THE CHIP SCALE
PACKAGE
The lands on the chip scale package (CP-20) are rectangular.
The printed circuit board pad for these should be 0.1 mm
longer than the package land length and 0.05 mm wider than
the package land width. The land should be centered on the pad.
This ensures that the solder joint size is maximized.
The bottom of the chip scale package has a central thermal pad.
The thermal pad on the printed circuit board (PCB) should be
at least as large as the exposed pad. On the printed circuit
board, there should be a clearance of at least 0.25 mm between
the thermal pad and the inner edges of the pad pattern. This
ensures that shorting is avoided.
Thermal vias can be used on the PCB thermal pad to improve
thermal performance of the package. If vias are used, they should
be incorporated into the thermal pad at 1.2 mm pitch grid. The
via diameter should be between 0.3 mm and 0.33 mm, and the
via barrel should be plated with 1 ounce of copper to plug the
via. The user should connect the PCB thermal pad to AGND.
相關PDF資料
PDF描述
V48C24E150BG2 CONVERTER MOD DC/DC 24V 150W
MCP100T-300I/TT IC SUPERVISOR ACTIVE LOW SOT23-3
GMM10DRTS CONN EDGECARD 20POS DIP .156 SLD
A2MXS-2636M ADM26S/AE26M/X
GSM10DREI CONN EDGECARD 20POS .156 EYELET
相關代理商/技術參數
參數描述
EV-ADF4159EB1Z 制造商:Analog Devices 功能描述:EVALUATION BOARD - Boxed Product (Development Kits) 制造商:Analog Devices 功能描述:EVAL BOARD FOR ADF4159
EV-ADF4159EB2Z 制造商:Analog Devices 功能描述:13GHZFRAC-NPLL+ADF55XXVCO+3VADM - Boxed Product (Development Kits)
EV-ADF4159EB3Z 制造商:Analog Devices 功能描述:EVALUATIONBOARD - Boxed Product (Development Kits) 制造商:Analog Devices 功能描述:EVAL BOARD FOR ADF4159 制造商:Analog Devices 功能描述:Clock & Timer Development Tools ADF4159 EVAL BRD
EV-ADF4360-0EB1Z 功能描述:BOARD EVAL FOR ADF4360-0 RoHS:是 類別:編程器,開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:- 主要目的:電信,線路接口單元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板,電源,線纜,CD 其它名稱:82EBV2081
EV-ADF4360-1EB1Z 功能描述:BOARD EVAL FOR ADF4360-1 RoHS:是 類別:編程器,開發系統 >> 評估演示板和套件 系列:- 標準包裝:1 系列:- 主要目的:電信,線路接口單元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要屬性:T1/J1/E1 LIU 次要屬性:- 已供物品:板,電源,線纜,CD 其它名稱:82EBV2081