![](http://datasheet.mmic.net.cn/140000/DS229E_datasheet_5001508/DS229E_1.png)
MAX14983E
Enhanced 1:2 VGA Mux with
Monitor Detection and Priority Port Logic
19-5935; Rev 0; 6/11
General Description
The MAX14983E integrates high-bandwidth analog
switches, level-translating buffers, and 5V power switches
to implement a complete 1:2 multiplexer for VGA moni-
tors. The device switches graphics signals between a
controller and two outputs. Integrated pullup resistors
(2.2kI typ) are provided on the monitor-side display data
channel (DDC) signal lines.
The device features a simple power interface that oper-
ates with a single +5V supply input. Two integrated
power switches with current limiting and reverse-current
protection pass the +5V supply to external loads with
minimal voltage drop.
The horizontal and vertical synchronization (HSYNC/
VSYNC) buffers shift logic levels to support +2.5V to
+5.0V CMOS or TTL-compatible graphics controllers
while meeting the VESA drive capability requirement of
Q
8mA. An internal 2.5V regulator translates the DDC
voltage levels to be compatible with low-voltage graphics
controllers.
The device also features monitor-detect outputs and
enable inputs that allow monitor switching to operate either
automatically or with inputs from the graphics controller.
The MAX14983E is available in a 32-pin (5mm x 5mm)
TQFN package, and is specified over the -40NC to +85NC
extended temperature range.
Applications
Servers
KVM Switches
Computing
Graphics Cards
Benefits and Features
S
Design Flexibility
Graphics Controller Port is Protected when
VCC = 0V
DDC Switches Limit Voltage to Low-Voltage
Supply
Internal +2.5V Regulator
S
High Level of Integration for Enhanced
Performance
Low 5.5pF (typ) RGB Capacitance
2.0ns (typ) tR/tF with 10pF, 2.2kI Load on
Monitor-Side SYNC Signals
Source and Sink 8mA While Meeting Speed
Requirements
±11kV Human Body Model (HBM)
S
Saves Space on Board
Internal Power Switches
Pass +5V with 300mV (max) IR Drop
Short-Circuit/Thermal/Reverse-Current
Protection
5mm x 5mm, 32-Pin TQFN Package
For related parts and recommended products to use with this part,
Typical Operating Circuit
EVALUATION KIT AVAILABLE
R0, G0, B0
R1, G1, B1
HSYNC1, VSYNC1
SCL1, SDA1
1F
S5V1
HSYNC0, VSYNC0
SCL0, SDA0
MDOR
MD1
MD2
EN1
EN2
GRAPHICS
CONTROLLER
VGA
PORT 1
+2.5V
3
2
3
2
S5V1
S5V2
R2, G2, B2
HSYNC2, VSYNC2
SCL2, SDA2
1F
105I
S5V2
GND
VGA
PORT 2
REF
3
2
VCC
+5V
0.1F
MAX14983E
For pricing, delivery, and ordering information, please contact Maxim Direct at
1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.