參數資料
型號： DS21FT40
元件分類： 通信及網絡
英文描述： Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
中文描述： Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
文件頁數： 48/87頁
文件大小： 386K
代理商： DS21FT40
DS21FT40
48 of 87
This method allows the same 8–bit code to be placed into any of the 32 E1 channels. If this method is
used, then the CCR3.5 control bit must be set to zero.
Each of the bit position in the Transmit Idle Registers (TIR1/TIR2/TIR3/TIR4) represent a DS0 channel
in the outgoing frame. When these bits are set to a one, the corresponding channel will transmit the Idle
Code contained in the Transmit Idle Definition Register (TIDR).
The Transmit Idle Registers (TIRs) have an alternate function that allows them to define a Per–Channel
LoopBack (PCLB). If the TIRFS control bit (CCR3.5) is set to one, then the TIRs will determine which
channels (if any) from the backplane should be replaced with the data from the receive side or in other
words, off of the E1 line. If this mode is enabled, then transmit and receive clocks and frame syncs must
be synchronized.
TIR1/TIR2/TIR3: TRANSMIT IDLE REGISTERS (Address=26 to 29 Hex)
[Also used for Per–Channel Loopback]
(MSB)
CH8
CH7
CH6
CH5
CH16
CH15
CH14
CH13
CH24
CH23
CH22
CH21
CH32
CH31
CH30
CH29
(LSB)
CH1
CH9
CH17
CH25
CH4
CH12
CH20
CH28
CH3
CH11
CH19
CH27
CH2
CH10
CH18
CH26
TIR1 (26)
TIR2 (27)
TIR3 (28)
TIR4 (29)
SYMBOLS
POSITIONS
NAME AND DESCRIPTION
CH1 - 32
TIR1.0 - 4.7
Transmit Idle Code Insertion Control Bits.
0 = do not insert the Idle Code in the TIDR into this channel
1 = insert the Idle Code in the TIDR into this channel
NOTE:
If CCR3.5=1, then a zero in the TIRs implies that channel data is to be sourced from TSER and a one
implies that channel data is to be sourced from the output of the receive side framer (i.e., Per–Channel
Loopback; see Figure 1–2).
TIDR: TRANSMIT IDLE DEFINITION REGISTER (Address=2A Hex)
(MSB)
TIDR7
TIDR6
TIDR5
TIDR4
(LSB)
TIDR0
TIDR3
TIDR2
TIDR1
SYMBOLS
POSITION
NAME AND DESCRIPTION
TIDR7
TIDR0
TIDR.7
TIDR.0
MSB of the Idle Code (this bit is transmitted first)
LSB of the Idle Code (this bit is transmitted last)
10.1.2
The second method involves using the Transmit Channel Control Registers (TCC1/2/3/4) to determine
which of the 32 E1 channels should be overwritten with the code placed in the Transmit Channel
Registers (TC1 to TC32). This method is more flexible than the first in that it allows a different 8–bit
code to be placed into each of the 32 E1 channels.
Per–Channel Code Insertion
相關PDF資料
PDF描述
DS21FT42 Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS21Q50N Telecommunication IC
DS21Q55DK Quad T1/E1/J1 Transceiver Design Kit Daughter Card
DS21Q55 Quad T1/E1/J1 Transceiver
DS21Q55N Quad T1/E1/J1 Transceiver
相關代理商/技術參數
參數描述
DS21FT40N 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
DS21FT42 功能描述:網絡控制器與處理器 IC 4x4 16/4x3 12 Chnl T1/T1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FT42N 功能描述:網絡控制器與處理器 IC 4x4 16/4x3 12 Chnl T1/T1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FT44 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21FT44+ 功能描述:網絡控制器與處理器 IC 4X3 E1 Framer E1 Framer E1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*