參數資料
型號： DS21354L
廠商： MAXIM INTEGRATED PRODUCTS INC
元件分類： Digital Transmission Interface
英文描述： DATACOM, PCM TRANSCEIVER, PQFP100
封裝： 14 X 14 MM, LQFP-100
文件頁數： 43/126頁
文件大?。?/td> 1082K
代理商： DS21354L
DS21354/DS21554 3.3V/5V E1 Single-Chip Transceivers
23 of 124
3.1.6.
Line Interface Pins
Signal Name:
MCLK
Signal Description:
Master Clock Input
Signal Type:
Input
A 2.048MHz (±50ppm) clock source with TTL levels is applied at this pin. This clock is used internally
for both clock/data recovery and for jitter attenuation. A quartz crystal of 2.048MHz may be applied
across MCLK and XTALD instead of the TTL level clock source.
Signal Name:
XTALD
Signal Description:
Quartz Crystal Driver
Signal Type:
Output
A quartz crystal of 2.048MHz may be applied across MCLK and XTALD instead of a TTL level clock
source at MCLK. Leave open circuited if a TTL clock source is applied at MCLK.
Signal Name:
8XCLK
Signal Description:
Eight-Times Clock
Signal Type:
Output
A 16.384MHz clock that is frequency locked to the 2.048MHz clock provided from the clock/data
recovery block (if the jitter attenuator is enabled on the receive side) or from the TCLKI pin (if the jitter
attenuator is enabled on the transmit side). Can be internally disabled via TEST2 register if not needed.
Signal Name:
LIUC
Signal Description:
Line Interface Connect
Signal Type:
Input
Tie low to separate the line interface circuitry from the framer/formatter circuitry and activate the
TPOSI/TNEGI/TCLKI/RPOSI/RNEGI/RCLKI pins. Tie high to connect the line interface circuitry to the
framer/formatter circuitry and deactivate the TPOSI/TNEGI/TCLKI/RPOSI/RNEGI/RCLKI pins. When
LIUC is tied high, the TPOSI/TNEGI/TCLKI/ RPOSI/RNEGI/RCLKI pins should be tied low.
Signal Name:
RTIP and RRING
Signal Description:
Receive Tip and Ring
Signal Type:
Input
Analog inputs for clock recovery circuitry. These pins connect via a 1:1 transformer to the E1 line. See
Section 15 for details.
Signal Name:
TTIP and TRING
Signal Description:
Transmit Tip and Ring
Signal Type:
Output
Analog line-driver outputs. These pins connect via a step-up transformer to the E1 line. See Section 15
for details.
相關PDF資料
PDF描述
DS21354LN DATACOM, PCM TRANSCEIVER, PQFP100
DS21372TN SPECIALTY TELECOM CIRCUIT, PQFP32
DS21372T SPECIALTY TELECOM CIRCUIT, PQFP32
DS21372 SPECIALTY TELECOM CIRCUIT, PQFP32
DS2141AN DATACOM, FRAMER, PDIP40
相關代理商/技術參數
參數描述
DS21354L+ 功能描述:網絡控制器與處理器 IC 3.3/5V E1 Single Chip Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21354LB 功能描述:網絡控制器與處理器 IC 3.3/5V E1 Single Chip Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21354LB+ 功能描述:網絡控制器與處理器 IC 3.3/5V E1 Single Chip Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21354LC1 功能描述:網絡控制器與處理器 IC 3.3/5V E1 Single Chip Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21354LC1+ 功能描述:網絡控制器與處理器 IC 3.3/5V E1 Single Chip Transceiver RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*