- 您現在的位置：買賣IC網 > PDF目錄97859 > DS1307 (MAXIM INTEGRATED PRODUCTS INC) 1 TIMER(S), REAL TIME CLOCK, PDIP8 PDF資料下載
參數資料
| 型號： | DS1307 |
| 廠商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分類： | Timer or RTC |
| 英文描述： | 1 TIMER(S), REAL TIME CLOCK, PDIP8 |
| 封裝： | 0.300 INCH, PLASTIC, DIP-8 |
| 文件頁數： | 3/14頁 |
| 文件大?。?/td> | 361K |
| 代理商： | DS1307 |
DS1307 64 x 8, Serial, I2C Real-Time Clock
11 of 14
Figure 3. Data Transfer on I2C Serial Bus
Depending upon the state of the R/
W bit, two types of data transfer are possible:
1.
Data transfer from a master transmitter to a slave receiver. The first byte transmitted by the master is the
slave address. Next follows a number of data bytes. The slave returns an acknowledge bit after each received
byte. Data is transferred with the most significant bit (MSB) first.
2.
Data transfer from a slave transmitter to a master receiver. The first byte (the slave address) is transmitted
by the master. The slave then returns an acknowledge bit. This is followed by the slave transmitting a number
of data bytes. The master returns an acknowledge bit after all received bytes other than the last byte. At the
end of the last received byte, a “not acknowledge” is returned.
The master device generates all the serial clock pulses and the START and STOP conditions. A transfer is
ended with a STOP condition or with a repeated START condition. Since a repeated START condition is also
the beginning of the next serial transfer, the bus will not be released. Data is transferred with the most
significant bit (MSB) first.
ACKNOWLEDGEMENT
SIGNAL FROM RECEIVER
ACKNOWLEDGEMENT
SIGNAL FROM RECEIVER
R/W
DIRECTION
BIT
REPEATED IF MORE BYTES
ARE TRANSFERED
START
CONDITION
STOP
CONDITION
OR
REPEATED
START
CONDITION
MSB
1
2
6
7
8
9
1
2
3-7
8
9
ACK
SDA
SCL
相關PDF資料 |
PDF描述 |
|---|---|
| DS1315EN-5 | 0 TIMER(S), REAL TIME CLOCK, PDSO20 |
| DS1315-5 | 0 TIMER(S), REAL TIME CLOCK, PDIP16 |
| DS1315EN-33 | 0 TIMER(S), REAL TIME CLOCK, PDSO20 |
| DS1315N-5 | 0 TIMER(S), REAL TIME CLOCK, PDIP16 |
| DS1315E-33 | 0 TIMER(S), REAL TIME CLOCK, PDSO20 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS1307_06 | 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:64 x 8, Serial, I2C Real-Time Clock |
| DS1307+ | 功能描述:實時時鐘 64x8 Serial I2C RTC RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube |
| DS1307+ | 制造商:Maxim Integrated Products 功能描述:IC RTC SERIAL 64X8 8DIP 制造商:Maxim Integrated Products 功能描述:IC, RTC, SERIAL, 64X8, 8DIP 制造商:Maxim Integrated Products 功能描述:IC, RTC, SERIAL, 64X8, 8DIP; Date Format:Day; Date; Month; Year; Clock Format:HH:MM:SS; Clock IC Type:RTC; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Digital IC Case Style:DIP; No. of Pins:8; Interface Type:I2C, Serial; ;RoHS Compliant: Yes |
| DS1307FP000 | 制造商:Thomas & Betts 功能描述:100A,CON,3P4W,MG,307,125/250V |
| DS1307FRA00 | 制造商:Thomas & Betts 功能描述:100A,REC,3P4W,MG,307,AGL,125/250V |
發布緊急采購，3分鐘左右您將得到回復。