參數資料
型號: AK7712A-VT
廠商: Asahi Kasei Microsystems Co.,Ltd
元件分類: 圓形連接器
英文描述: Circular Connector; No. of Contacts:8; Series:MS27484; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:16; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:16-8 RoHS Compliant: No
中文描述: 內置20位ADC / DAC的尖端音頻DSP
文件頁數: 77/87頁
文件大?。?/td> 968K
代理商: AK7712A-VT
ASAHI KASEI
[AK7712A-VT]
0180-E-02
1997/12
- 77 -
Reset Control
1) System Reset
During power-up, please reset by setting both PD and RST pin "L" to "H". The reset is cancelled at XTI "
". Then,
the inside timing becomes to synchronize with LRCK"
", and the inside LRCK becomes to action since 4LRCK
after, and DSP unit becomes to action.
2) Powerdown-Reset control
The reset is controlled with 2 pins of system reset(RST)and power down(PD). It is also able to control the state of
ADC/DAC by using PDAD/PDDA pins in support.
The setting of "PD:L, RST:L" makes all the circuit reset and MOS resistance of quartz oscillator OFF. In this
state, by stopping XTI, BCLK and LRCK, power down state is realized(the leak is checked with this state at test).
At "PD:L, RST:L", since MOS resistance of quartz oscillator is also off, output from CLKO and XTO can not be
guaranteed.
"PD:L, RST:L" is used at power on, or at setting to power down state.
If "PD:H, RST:L" is set, each register of DSP unit is reset(control register is not reset), and PRAM, DRAM and
OFRAM become write enable state. In that case, both of AD unit and DA unit become reset( power down)
state(when PDAD and PDDA are "L").
The reset( power down) state is cancelled at first "
" of XTI after setting RST to "H". In that case, DAC output is
done after 2Ts cycles, but ADC takes 516Ts cycles for initialize, then output data becomes "0". (Ts = 1/fs)
By PDAD/PDDA, the control of reset state(power down) for AD/DA unit can be separated to the control of reset
for DSP unit. Usually both of PDAD and PDDA are used with "L". But in the case that DSP is reset and
PRAM,DRAM and OFRAM are rewritten, not to make ADC and DAC power down state, please set PDAD and
PDDA to "H" after power on.
PD
RST
PDAD
PDDA
AD
DA
"L" "H" "H" "H" "H" "H"
"L" "L" "L" "L" "L" "H"
- "L" "L" "H" "H" -
- "L" "H" "L" "H" -
PD
RUN RUN RUN
PD
RUN
RUN RUN
(-: Don't care, PD: power down, RUN: run state,
: can not run)
The format is shown in the table .
In the case of writing data to control
register, set PDAD and PDDA to "L".
To make the change of PDAD and
PDDA, set RST to "L".
相關PDF資料
PDF描述
AK7714 Circular Connector; No. of Contacts:8; Series:MS27484; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:16; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:16-8 RoHS Compliant: No
AK7714VT Circular Connector; No. of Contacts:8; Series:MS27484; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:16; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:16-8 RoHS Compliant: No
AK7730A JT 23C 21#20 2#16 SKT GRND
AK8414 AK8414
AK8430 JT 11C 11#16 SKT PLUG
相關代理商/技術參數
參數描述
AK7712AVTP 制造商:Asahi Kasei Microsystems Co Ltd 功能描述:BUILT-IN 20-BIT ADC/DAC SOPHISTICATED AUDIO DSP
AK7714 制造商:AKM 制造商全稱:AKM 功能描述:20-Bit Audio Codec with DSP and Delay RAM
AK7714VT 制造商:AKM 制造商全稱:AKM 功能描述:20-Bit Audio Codec with DSP and Delay RAM
AK7716VT 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Consumer IC
AK7719 制造商:AKM 制造商全稱:AKM 功能描述:Low Power DSP for Voice and Audio Processing