
ASAHI KASEI 
[AK4707] 
MS0551-E-00 
2006/10 
- 25 - 
INT Function and Mask Options (09H: D3-D1) 
Changes of the 08H status can be monitored via the INT pin. The INT pin is the open drain output and goes “L” for 2
μ
s 
(typ.) when the status of 08H is changed. This pin should be connected to VD (typ. 5V) through 10kohm resistor. 
MTV bit, MVC bit, MCOMN bit, MFVCR bit and MSVCR bit control the reflection of the status change of these 
monitors onto the INT pin from report to prevent to masks each monitor. 
AK4707
R=10k
INT
VD
uP
Figure 6. INT pin 
MVC: VCMON Mask. Refer Table 18 
MTV: TVMON Mask. Refer Table 17 
MCOMN: Refer Table 16 
AUTO 
(00H D3) 
0 
0 
0 
0 
1 
1 
Note 20. When the STBY bit = “0”, the TV Monitor Mask function is enabled. 
Note 21. When AUTO bit = “1”, TVMON does not change. 
Table 17. TV Monitor Mask 
TVMON 
(08H D4) 
No Change 
No Change 
Change 
Change 
No Change 
No Change 
MTV 
(09H D4) 
0 
1 
0 
1 
0 
1 
INT 
Hi-Z 
Hi-Z 
Generates “L” Pulse 
Hi-Z 
Hi-Z 
Hi-Z 
AUTO 
(00H D3) 
0 
0 
0 
0 
1 
1 
1 
1 
Note 22. When the STBY bit = “0”, the VCR Monitor Mask function is enabled. 
Table 18. VCR Monitor Mask 
VCMON 
(08H D3) 
No Change 
No Change 
Change 
Change 
No Change 
No Change 
Change 
Change 
MVC 
(09H D3) 
0 
1 
0 
1 
0 
1 
0 
1 
INT 
Hi-Z 
Hi-Z 
Generates “L” Pulse 
Hi-Z 
Hi-Z 
Hi-Z 
Generates “L” Pulse 
Generates “L” Pulse 
MFVCR: FVCR Monitor mask. 
0: Change of FVCR is reflected to INT pin. (default) 
  1: Change of FVCR is NOT reflected to INT pin. 
MSVCR: SVCR1-0 Monitor mask 
0: Change of SVCR1-0 is reflected to INT pin. (default) 
  1: Change of SVCR1-0 is NOT reflected to INT pin.