
Device Architecture
2-134
Revision 4
Table 2-61 details the settings available to either power down or enable the prescaler associated with the
analog inputs AV, AC, and AT.
Table 2-62 details the settings available to enable the Current Monitor Block associated with the AC pin.
Table 2-63 details the settings available to configure the drive strength of the gate drive when not in high-
drive mode.
Table 2-64 details the settings available to set the polarity of the gate driver (either p-channel- or
n-channel-type devices).
Table 2-65 details the settings available to turn on the Gate Driver and set whether high-drive mode is on
or off.
Table 2-66 details the settings available to turn on and off the chip internal temperature monitor.
Note: For the internal temperature monitor to function, Bit 0 of Byte 2 for all 10 Quads must be set.
Table 2-61 Prescaler Op Amp Power-Down Truth Table—AV (x = 0), AC (x = 1), and AT (x = 3)
Control Lines Bx[7]
Prescaler Op Amp
0
Power-down
1
Operational
Table 2-62 Current Monitor Input Switch Control Truth Table—AV (x = 0)
Control Lines B0[4]
Current Monitor Input Switch
0
Off
1
On
Table 2-63 Low-Drive Gate Driver Current Truth Table (AG)
Control Lines B2[3]
Control Lines B2[2]
Current (A)
0
1
0
1
3
1
0
10
1
30
Table 2-64 Gate Driver Polarity Truth Table (AG)
Control Lines B2[6]
Gate Driver Polarity
0
Positive
1
Negative
Table 2-65 Gate Driver Control Truth Table (AG)
Control Lines B2[7]
GDON
Gate Driver
0
Off
0
1
Low drive on
1
0
Off
1
High drive on
Table 2-66 Internal Temperature Monitor Control Truth Table
Control Lines B2[0]
PDTMB
Chip Internal Temperature Monitor
00
Off
11
On