參數資料
型號： ADL5387-EVALZ1
廠商： Analog Devices, Inc.
英文描述： 50 MHz to 2 GHz Quadrature Demodulator
中文描述： 50兆赫至2千兆赫正交解調器
文件頁數： 16/28頁
文件大?。?/td> 648K
代理商： ADL5387-EVALZ1
ADL5387
RF INPUT
The RF inputs have a differential input impedance of
approximately 50 Ω. For optimum performance, the RF port
should be driven differentially through a balun. The recommended
balun is M/A-COM ETC1-1-13. The RF inputs to the device
should be ac-coupled with 1000 pF capacitors. Ground-referenced
choke inductors must also be connected to RFIP and RFIN
(recommended value = 120 nH, Coilcraft 0402CS-R12XJL) for
appropriate biasing. Several important aspects must be taken
into account when selecting an appropriate choke inductor for
this application. First, the inductor must be able to handle the
approximately 40 mA of standing dc current being delivered
from each of the RF input pins (RFIP, RFIN). (The suggested
0402 inductor has a 50 mA current rating). The purpose of the
choke inductors is to provide a very low resistance dc path to
ground and high ac impedance at the RF frequency so as not to
affect the RF input impedance. A choke inductor that has a self-
resonant frequency greater than the RF input frequency ensures
that the choke is still looking inductive and therefore has a more
predictable ac impedance (jωL) at the RF frequency. Figure 48
shows the RF input configuration.
Rev. 0 | Page 16 of 28
RF INPUT
RFIN
ETC1-1-13
120nH
120nH
RFIP
1000pF
1000pF
21
22
0
Figure 48. RF Input
The differential RF port return loss has been characterized as
shown in Figure 49.
–10
–12
–14
–16
–18
–20
–22
–24
–26
–28
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
S
FREQUENCY (GHz)
0
Figure 49. Differential RF Port Return Loss
BASEBAND OUTPUTS
The baseband outputs QHI, QLO, IHI, and ILO are fixed
impedance ports. Each baseband pair has a 50 Ω differential
output impedance. The outputs can be presented with differential
loads as low as 200 Ω (with some degradation in linearity and
gain) or high impedance differential loads (500 Ω or greater
impedance yields the same excellent linearity) that is typical of
an ADC. The TCM9-1 9:1 balun converts the differential IF
output to single-ended. When loaded with 50 Ω, this balun
presents a 450 Ω load to the device. The typical maximum
linear voltage swing for these outputs is 2 V p-p differential.
The bias level on these pins is equal to VPOS 2.8 V. The
output 3 dB bandwidth is 240 MHz. Figure 50 shows the
baseband output configuration.
QHI
QLO
IHI
ILO
QHI
QLO
IHI
ILO
16
15
14
13
0
Figure 50. Baseband Output Configuration
相關PDF資料
PDF描述
ADL5390-EVAL RF/IF Vector Multiplier
ADL5390ACPZ-REEL71 RF/IF Vector Multiplier
ADL5390ACPZ-WP1 RF/IF Vector Multiplier
ADL5390 RF/IF Vector Multiplier
ADL5391 DC to 2.0 GHz Multiplier
相關代理商/技術參數
參數描述
ADL5390 制造商:AD 制造商全稱:Analog Devices 功能描述:400 MHz to 6 GHz Broadband Quadrature Modulator
ADL5390ACPZ 制造商:Analog Devices 功能描述:RF/IF VECTOR MLTPLR 24LFCSP - Tape and Reel 制造商:Analog Devices 功能描述:RF VECTOR MULTIPLIER 2.3GHZ SMD 制造商:Analog Devices 功能描述:RF Vector Multiplier,wideband,ADL5390
ADL5390ACPZ-REEL7 功能描述:IC MULTIPLIER VECTOR 24LFCSP RoHS:是 類別:RF/IF 和 RFID >> RF 其它 IC 和模塊 系列:- 標準包裝:100 系列:*
ADL5390ACPZ-REEL71 制造商:AD 制造商全稱:Analog Devices 功能描述:RF/IF Vector Multiplier
ADL5390ACPZ-WP 功能描述:IC MULTIPLIER RF VECTOR 24-LFCSP RoHS:是 類別:RF/IF 和 RFID >> RF 其它 IC 和模塊 系列:- 標準包裝:100 系列:*
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*