- 您現在的位置：買賣IC網 > PDF目錄9088 > ADF4351BCPZ-RL7 (Analog Devices Inc)IC SYNTH PLL VCO 32LFCSP PDF資料下載
參數資料
| 型號： | ADF4351BCPZ-RL7 |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 3/28頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC SYNTH PLL VCO 32LFCSP |
| 標準包裝： | 1,500 |
| 類型： | 扇出配送，分?jǐn)?shù)-N，整數-N，時鐘/頻率合成器（RF） |
| PLL： | 是 |
| 輸入： | CMOS，TTL |
| 輸出： | 時鐘 |
| 電路數： | 1 |
| 比率 - 輸入:輸出： | 1:3 |
| 差分 - 輸入:輸出： | 無/無 |
| 頻率 - 最大： | 4.4GHz |
| 除法器/乘法器： | 是/是 |
| 電源電壓： | 3 V ~ 3.6 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 32-VFQFN 裸露焊盤，CSP |
| 供應商設備封裝： | 32-LFCSP（5x5） |
| 包裝： | 帶卷 (TR) |
第1頁第2頁當前第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁
Data Sheet
ADF4351
Rev. 0 | Page 11 of 28
CIRCUIT DESCRIPTION
REFERENCE INPUT SECTION
The reference input stage is shown in Figure 16. The SW1 and
SW2 switches are normally closed. The SW3 switch is normally
open. When power-down is initiated, SW3 is closed, and SW1
and SW2 are opened. In this way, no loading of the REFIN pin
occurs during power-down.
BUFFER
TO R COUNTER
REFIN
100k
NC
SW2
SW3
NO
NC
SW1
POWER-DOWN
CONTROL
09800-
005
Figure 16. Reference Input Stage
RF N DIVIDER
The RF N divider allows a division ratio in the PLL feedback
path. The division ratio is determined by the INT, FRAC, and
MOD values, which build up this divider (see Figure 17).
THIRD-ORDER
FRACTIONAL
INTERPOLATOR
MOD
VALUE
FRAC
VALUE
INT
VALUE
RF N DIVIDER
N = INT + FRAC/MOD
FROM
VCO OUTPUT/
OUTPUT DIVIDERS
TO PFD
N COUNTER
09800-
006
Figure 17. RF N Divider
INT, FRAC, MOD, and R Counter Relationship
The INT, FRAC, and MOD values, in conjunction with the
R counter, make it possible to generate output frequencies that
are spaced by fractions of the PFD frequency. For more informa-
tion, see the RF Synthesizer—A Worked Example section.
The RF VCO frequency (RFOUT) equation is
RFOUT = fPFD × (INT + (FRAC/MOD))
(1)
where:
RFOUT is the output frequency of the voltage controlled oscillator
(VCO).
INT is the preset divide ratio of the binary 16-bit counter (23 to
65,535 for the 4/5 prescaler; 75 to 65,535 for the 8/9 prescaler).
FRAC is the numerator of the fractional division (0 to MOD 1).
MOD is the preset fractional modulus (2 to 4095).
The PFD frequency (fPFD) equation is
fPFD = REFIN × [(1 + D)/(R × (1 + T))]
(2)
where:
REFIN is the reference input frequency.
D is the REFIN doubler bit (0 or 1).
R is the preset divide ratio of the binary 10-bit programmable
reference counter (1 to 1023).
T is the REFIN divide-by-2 bit (0 or 1).
Integer-N Mode
If FRAC = 0 and the DB8 (LDF) bit in Register 2 is set to 1, the
synthesizer operates in integer-N mode. The DB8 bit in Register 2
should be set to 1 for integer-N digital lock detect.
R Counter
The 10-bit R counter allows the input reference frequency
(REFIN) to be divided down to produce the reference clock
to the PFD. Division ratios from 1 to 1023 are allowed.
PHASE FREQUENCY DETECTOR (PFD) AND
CHARGE PUMP
The phase frequency detector (PFD) takes inputs from the
R counter and N counter and produces an output proportional
to the phase and frequency difference between them. Figure 18
is a simplified schematic of the phase frequency detector.
U3
CLR2
Q2
D2
U2
DOWN
UP
HIGH
CPOUT
–IN
+IN
CHARGE
PUMP
DELAY
CLR1
Q1
D1
U1
09800-
007
Figure 18. PFD Simplified Schematic
The PFD includes a programmable delay element that sets the
width of the antibacklash pulse (ABP). This pulse ensures that
there is no dead zone in the PFD transfer function. Bit DB22 in
Register 3 (R3) is used to set the ABP as follows:
When Bit DB22 is set to 0, the ABP width is programmed to
6 ns, the recommended value for fractional-N applications.
When Bit DB22 is set to 1, the ABP width is programmed to
3 ns, the recommended value for integer-N applications.
For integer-N applications, the in-band phase noise is improved
by enabling the shorter pulse width. The PFD frequency can
operate up to 90 MHz in this mode. To operate with PFD
frequencies higher than 45 MHz, VCO band select must be dis-
abled by setting the phase adjust bit (DB28) to 1 in Register 1.
相關PDF資料 |
PDF描述 |
|---|---|
| V24A24H300BF2 | CONVERTER MOD DC/DC 24V 300W |
| M83723/95R10057 | CONN PLUG 5POS STRAIGHT W/SCKT |
| V24A15H300BL | CONVERTER MOD DC/DC 15V 300W |
| D38999/20JC4JN | CONN RCPT 4POS WALL MNT W/SCKT |
| MS27474E16B6SD | CONN RCPT 6POS JAM NUT W/SCKT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADF4351BCPZ-U5 | 制造商:Analog Devices 功能描述:- Rail/Tube |
| ADF4351BCPZ-U6 | 制造商:Analog Devices 功能描述:WIDEBAND SYNTHESIZER WITH INTEGRATED VCO - Rail/Tube |
| ADF4355-2BCPZ | 功能描述:IC INTEGRATED SYNTH/VCO 32LFCSP 制造商:analog devices inc. 系列:- 包裝:托盤 零件狀態:有效 類型:* PLL:是 輸入:時鐘 輸出:時鐘 電路數:1 比率 - 輸入:輸出:1:2 差分 - 輸入:輸出:無/無 頻率 - 最大值:4.4GHz 分頻器/倍頻器:是/是 電壓 - 電源:3.15 V ~ 3.45 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:32-WFQFN 裸露焊盤，CSP 供應商器件封裝:32-LFCSP-WQ（5x5） 標準包裝:1 |
| ADF4355-2BCPZ-RL7 | 功能描述:IC INTEGRATED SYNTH/VCO 32LFCSP 制造商:analog devices inc. 系列:- 包裝:帶卷（TR） 零件狀態:有效 類型:* PLL:是 輸入:時鐘 輸出:時鐘 電路數:1 比率 - 輸入:輸出:1:2 差分 - 輸入:輸出:無/無 頻率 - 最大值:4.4GHz 分頻器/倍頻器:是/是 電壓 - 電源:3.15 V ~ 3.45 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:32-WFQFN 裸露焊盤，CSP 供應商器件封裝:24-LFCSP-WQ（4x4） 標準包裝:1,500 |
| ADF4355-3BCPZ | 功能描述:IC INTEGRATED SYNTH/VCO 32LFCSP 制造商:analog devices inc. 系列:- 包裝:托盤 零件狀態:有效 類型:* PLL:是 輸入:時鐘 輸出:時鐘 電路數:1 比率 - 輸入:輸出:1：3 差分 - 輸入:輸出:是/是 頻率 - 最大值:6.6GHz 分頻器/倍頻器:是/是 電壓 - 電源:3.15 V ~ 3.45 V 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:32-WFQFN 裸露焊盤，CSP 供應商器件封裝:32-LFCSP-WQ（5x5） 標準包裝:1 |
發布緊急采購，3分鐘左右您將得到回復。