- 您現在的位置：買賣IC網 > PDF目錄10794 > ADCMP551BRQZ (Analog Devices Inc)IC COMPARATOR PECL/LVPECL 16QSOP PDF資料下載
參數資料
| 型號： | ADCMP551BRQZ |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 4/16頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC COMPARATOR PECL/LVPECL 16QSOP |
| 標準包裝： | 98 |
| 類型： | 帶鎖銷 |
| 元件數： | 1 |
| 輸出類型： | 補充型，差分，LVPECL，開路發射極，PECL |
| 電壓 - 電源，單路/雙路(±)： | 3.14 V ~ 5.25 V |
| 電壓 - 輸入偏移（最小值）： | 10mV @ 3.3V |
| 電流 - 輸入偏壓（最小值）： | 28µA @ 3.3V |
| 電流 - 輸出（標準）： | 55mA @ 3.3V |
| 電流 - 靜態（最大值）： | 17mA |
| CMRR, PSRR（標準）： | 76dB CMRR，75dB PSRR |
| 傳輸延遲（最大）： | 0.625ns |
| 磁滯： | ± 0.5mV |
| 工作溫度： | -40°C ~ 85°C |
| 封裝/外殼： | 16-SSOP（0.154"，3.90mm 寬） |
| 安裝類型： | 表面貼裝 |
| 包裝： | 管件 |
| 產品目錄頁面： | 764 (CN2011-ZH PDF) |
| 配用： | EVAL-ADCMP551BRQZ-ND - BOARD EVALUATION ADCMP551BRQZ |
ADCMP551/ADCMP552/ADCMP553
Data Sheet
Rev. A | Page 12 of 16
Figure 18. Propagation Delay Dispersion
COMPARATOR HYSTERESIS
The addition of hysteresis to a comparator is often useful in a
noisy environment or where it is not desirable for the
comparator to toggle between states when the input signal is at
the switching threshold. The transfer function for a comparator
with hysteresis is shown in Figure 19. If the input voltage
approaches the threshold from the negative direction, the
comparator switches from a 0 to a 1 when the input crosses
+VH/2. The new switching threshold becomes VH/2. The
comparator remains in a 1 state until the VH/2 threshold is
crossed coming from the positive direction. In this manner,
noise centered on 0 V input does not cause the comparator to
switch states unless it exceeds the region bounded by ±VH/2.
Positive feedback from the output to the input is often used to
produce hysteresis in a comparator (Figure 23). The major
problem with this approach is that the amount of hysteresis
varies with the output logic levels, resulting in a hysteresis that
is not symmetrical around zero.
In the ADCMP552, hysteresis is generated through the
programmable hysteresis pin. A resistor from the HYS pin to
VCCI creates a current into the part that is used to generate
hysteresis. Hysteresis generated in this manner is independent
of output swing and is symmetrical around the trip point. The
hysteresis versus resistance curve is shown in Figure 20.
A current source can also be used with the HYS pin. The
relationship between the current applied to the HYS pin and the
resulting hysteresis is shown in Figure 16.
Figure 19. Comparator Hysteresis Transfer Function
Figure 20. Comparator Hysteresis Transfer Function
MINIMUM INPUT SLEW RATE REQUIREMENT
As for all high speed comparators, a minimum slew rate must
be met to ensure that the device does not oscillate when the
input crosses the threshold. This oscillation is due in part to the
high input bandwidth of the comparator and the parasitics of
the package. Analog Devices recommends a slew rate of 1 V/s
or faster to ensure a clean output transition. If slew rates less
than 1 V/s are used, hysteresis should be added to reduce the
oscillation.
Q OUTPUT
INPUT VOLTAGE
1.5V OVERDRIVE
20mV OVERDRIVE
DISPERSION
VREF ± VOS
04722-017
OUTPUT
INPUT
0
1
0V
–VH
2
+VH
2
04722-018
120
100
80
60
40
20
0
100
10
1
04722-019
RHYS (k)
PROGRAMMED
HYSTERESIS
(mV)
相關PDF資料 |
PDF描述 |
|---|---|
| LTC486CSW#PBF | IC DVR RS485 LOW PWR QUAD 16SOIC |
| VI-J4N-MY-S | CONVERTER MOD DC/DC 18.5V 50W |
| B37987M1333K054 | CAP CER 0.033UF 100V 10% RADIAL |
| ADCMP564BRQZ | IC COMPARATOR ECL DUAL HS 20QSOP |
| LTC487CSW#PBF | IC DVR RS485 LOW PWR QUAD 16SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADCMP551BRQZ-REEL7 | 功能描述:IC COMPARATOR PECL/LVPECL 16QSOP RoHS:是 類別:集成電路 (IC) >> 線性 - 比較器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 類型:通用 元件數:1 輸出類型:CMOS，推挽式，滿擺幅，TTL 電壓 - 電源，單路/雙路(±):2.5 V ~ 5.5 V，±1.25 V ~ 2.75 V 電壓 - 輸入偏移（最小值）:5mV @ 5.5V 電流 - 輸入偏壓（最小值）:1pA @ 5.5V 電流 - 輸出（標準）:- 電流 - 靜態（最大值）:24µA CMRR, PSRR（標準）:80dB CMRR，80dB PSRR 傳輸延遲（最大）:450ns 磁滯:±3mV 工作溫度:-40°C ~ 85°C 封裝/外殼:6-WFBGA，CSPBGA 安裝類型:表面貼裝 包裝:管件 其它名稱:Q3554586 |
| ADCMP552 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Single Supply High Speed PECL Comparators |
| ADCMP552BRQ | 功能描述:IC COMPARATOR PECL/LVPECL 20QSOP RoHS:否 類別:集成電路 (IC) >> 線性 - 比較器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:2,500 系列:- 類型:通用 元件數:1 輸出類型:CMOS，推挽式，滿擺幅，TTL 電壓 - 電源，單路/雙路(±):2.5 V ~ 5.5 V，±1.25 V ~ 2.75 V 電壓 - 輸入偏移（最小值）:5mV @ 5.5V 電流 - 輸入偏壓（最小值）:1pA @ 5.5V 電流 - 輸出（標準）:- 電流 - 靜態（最大值）:24µA CMRR, PSRR（標準）:80dB CMRR，80dB PSRR 傳輸延遲（最大）:450ns 磁滯:±3mV 工作溫度:-40°C ~ 85°C 封裝/外殼:6-WFBGA，CSPBGA 安裝類型:表面貼裝 包裝:管件 其它名稱:Q3554586 |
| ADCMP552BRQZ | 功能描述:IC COMPARATOR PECL/LVPECL 20QSOP RoHS:是 類別:集成電路 (IC) >> 線性 - 比較器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:帶電壓基準 元件數:4 輸出類型:開路漏極 電壓 - 電源，單路/雙路(±):2.5 V ~ 11 V，±1.25 V ~ 5.5 V 電壓 - 輸入偏移（最小值）:10mV @ 5V 電流 - 輸入偏壓（最小值）:- 電流 - 輸出（標準）:0.015mA @ 5V 電流 - 靜態（最大值）:8.5µA CMRR, PSRR（標準）:80dB CMRR，80dB PSRR 傳輸延遲（最大）:- 磁滯:- 工作溫度:0°C ~ 70°C 封裝/外殼:16-SOIC（0.154"，3.90mm 寬） 安裝類型:表面貼裝 包裝:管件 產品目錄頁面:1386 (CN2011-ZH PDF) |
| ADCMP553 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Single-Supply, High Speed PECL/LVPECL Comparators |
發布緊急采購，3分鐘左右您將得到回復。