
AD9042
Rev. B | Page 6 of 24
ABSOLUTE MAXIMUM RATINGS
Table 4.
Rating
AVCC Voltage
0 V to 7 V
DVCC Voltage
0 V to 7 V
Analog Input Voltage
0.5 V to 4.5 V
Analog Input Current
20 mA
Digital Input Voltage (ENCODE)
0 V to AVCC
ENCODE, ENCODE Differential Voltage
4 V
Digital Output Current
40 to +40 mA
Operating Temperature Range (Ambient)
40 °C to +85°C
Maximum Junction Temperature
+150°C
Lead Temperature (Soldering, 10 sec)
+300°C
Storage Temperature Range (Ambient)
65°C to +150°C
1Absolute maximum ratings are limiting values to be applied individually, and
beyond which the serviceability of the circuit may be impaired.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 5. Thermal Resistance
Package Type
θJA
Unit
44-Lead LQFP
55
°C/W
EXPLANATION OF TEST LEVELS
I.
100% production tested.
II.
100% production tested at +25°C, and sample tested at
specified temperatures. AC testing done on sample basis.
III.
Sample tested only.
IV.
Parameter is guaranteed by design and characterization
testing.
V.
Parameter is a typical value only.
VI.
100% production tested at +25°C; sample tested at
temperature extremes.
ESD CAUTION