
Fast, Rail-to-Rail, Low Power, 2.5 V to 5.5 V,
Single-Supply TTL/CMOS Comparator
Data Sheet
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
FEATURES
Qualified for automotive applications
Fully specified rail-to-rail at VCC = 2.5 V to 5.5 V
Input common-mode voltage: VEE 0.2 V to VCC + 0.2 V
Low glitch TTL-/CMOS-compatible output stage
40 ns propagation delay
Low power: 1.4 mW at 2.5 V
Shutdown pin
Programmable hysteresis
Power supply rejection better than 50 dB
40°C to +125°C operation
APPLICATIONS
High speed instrumentation
Clock and data signal restoration
Logic level shifting or translation
High speed line receivers
Threshold detection
Peak and zero-crossing detectors
High speed trigger circuitry
Pulse-width modulators
Current/voltage controlled oscillators
GENERAL DESCRIPTION
The
AD8469 is a fast comparator fabricated on XFCB2, an
Analog Devices, Inc., proprietary process. This comparator is
exceptionally versatile and easy to use. Features include an input
range from VEE 0.2 V to VCC + 0.2 V, low noise, TTL- and
CMOS-compatible output drivers, adjustable hysteresis control,
and a shutdown input. The device offers a 40 ns propagation
delay driving a 15 pF load with 10 mV overdrive on 500 A
typical supply current.
A flexible power supply scheme allows the device to operate
from a single +2.5 V positive supply with a 0.2 V to +2.7 V
input signal range up to a +5.5 V positive supply with a 0.2 V
to +5.7 V input signal range.
The TTL-/CMOS-compatible output stage is designed to drive
up to 15 pF with full rated timing specifications and to degrade
in a graceful and linear fashion as additional capacitance is added.
The input stage of the comparator offers robust protection against
large input overdrive, and the outputs do not phase reverse when
the valid input signal range is exceeded.
T
he AD8469 is available in an 8-lead MSOP package and features
a shutdown pin and hysteresis control. It is fully specified over
an operating temperature range of 40°C to +125°C.
FUNCTIONAL BLOCK DIAGRAM
VP NONINVERTING
INPUT
VN INVERTING
INPUT
SDN INPUT
Q OUTPUT
HYS INPUT
10490-
001
AD8469
TTL/CMOS
Figure 1.