- 您現在的位置：買賣IC網 > PDF目錄359893 > 43184&43181 Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits PDF資料下載
參數資料
| 型號： | 43184&43181 |
| 英文描述： | Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits |
| 中文描述： | 扭力測試儀20-400 |
| 文件頁數： | 5/12頁 |
| 文件大?。?/td> | 255K |
| 代理商： | 43184&43181 |
PRO-TEST OPERATORS HANDBOOK
PAGE 3 OF 10
ISSUE 4
AUGUST 1998
3.
Plug Power Supply into back of transducer housing then plug mains lead into Power Supply.
If a mains plug is not fitted, wire as follows :
BROWN-LIVE
BLUE-NEUTRAL
GREEN / YELLOW-EARTH
WARNING! It is important that live, neutral and earth are all connected
between the Pro-Test and mains power supply. If no earth is available (2 wire
mains power supply) it is recommended that a separate earth is connected
between the transducer housing (the bottom right hand fixing screw in the
corner of the back panel is ideal) and a suitable earth.
4.
If power supply has an ON/OFF fitted, switch to ‘ON’.
5.
Wait 2 seconds for initialisation and allow 5 minutes for the instrument to warm up and stabilise,
then press ‘ZERO’.
6.
Select required units of measurement. Pressing the ‘SELECT UNITS’ button once will step onto
the next available unit of measurement.
7.
Select mode of measurement required. Pressing the ‘MODE’ button once will step onto the next
available.
BENDING BEAM WRENCHES, DIAL TYPE WRENCHES & TORQUE SCREWDRIVERS:- _______
INSTRUMENT MODE :
Peak memory with manual reset or
Peak memory with auto reset
PRESET (CLICK) WRENCHES & TORQUE SCREWDRIVERS:- ____________________________
INSTRUMENT MODE :
First peak memory with manual reset or
First peak memory with auto reset
8.
Fit adapter supplied to hex drive of transducer, then tool to be tested to square of adapter.
9.
Operate tool to be tested.
10. If the Pro-Test is loaded in a ‘MANUAL RESET’ mode, press ‘RESET’ to clear the display after
the torque has been removed. If an ‘AUTO RESET’ mode is used, the display will clear
automatically after the torque has been removed.
NOTE:- If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment could be impaired.
相關PDF資料 |
PDF描述 |
|---|---|
| 431LP4E | MMIC VCO w/ BUFFER AMPLIFIER, 5.5 - 6.1 GHz |
| 431PADS1X12X25MM | KLEBEKISSEN BOX 300 Inhalt pro Packung: 300 Stk. |
| 431 | Surface Mount Fuses - Thin-Film Surface Mount |
| 432-0100-1 | Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits |
| 432-0500-1 | BUCHSE CINCH GOLDAUFLAGE 0.5U ROT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 4318550001 | 制造商:TE Connectivity 功能描述:RPS-2.5K-18-12/2.0-S2-9 - Bulk |
| 4-318711-0 | 制造商:TE Connectivity 功能描述:ANVIL, COMBINATION - Bulk |
| 4-318711-1 | 制造商:TE Connectivity 功能描述:ANVIL, COMBINATION - Bulk |
| 4-318711-2 | 功能描述:折皺器 ANVIL, COMBINATION RoHS:否 制造商:Hirose Connector 類型: 描述/功能:Cable and Shield Crimper |
| 4-318711-3 | 功能描述:折皺器 ANVIL, COMBINATION RoHS:否 制造商:Hirose Connector 類型: 描述/功能:Cable and Shield Crimper |
發布緊急采購，3分鐘左右您將得到回復。