參數資料
型號: 12CE673
廠商: Microchip Technology Inc.
英文描述: HookUp/Lead Wire; Conductor Size AWG:18; No. Strands x Strand Size:65 x 36; Jacket Color:Black; Conductor Material:Copper; Jacket Material:Rubber; Leaded Process Compatible:Yes; Number of Conductors:1; Outer Diameter:0.144" RoHS Compliant: Yes
中文描述: 8引腳,8位CMOS微控制器與A / D轉換器和EEPROM數據存儲器
文件頁數: 33/116頁
文件大小: 671K
代理商: 12CE673
1998 Microchip Technology Inc.
Preliminary
DS40181B-page 33
PIC12CE67X
7.2
When an external clock input is used for Timer0, it must
meet certain requirements. The requirements ensure
the external clock can be synchronized with the internal
phase clock (T
OSC
). Also, there is a delay in the actual
incrementing of Timer0 after synchronization.
Using Timer0 with an External Clock
7.2.1
EXTERNAL CLOCK SYNCHRONIZATION
When no prescaler is used, the external clock input is
the same as the prescaler output. The synchronization
of T0CKI with the internal phase clocks is accom-
plished by sampling the prescaler output on the Q2 and
Q4 cycles of the internal phase clocks (Figure 7-5).
Therefore, it is necessary for T0CKI to be high for at
least 2Tosc (and a small RC delay of 20 ns) and low for
at least 2Tosc (and a small RC delay of 20 ns). Refer to
the electrical specification of the desired device.
When a prescaler is used, the external clock input is
divided by the asynchronous ripple-counter type pres-
caler so that the prescaler output is symmetrical. For
the external clock to meet the sampling requirement,
the ripple-counter must be taken into account. There-
fore, it is necessary for T0CKI to have a period of at
least 4Tosc (and a small RC delay of 40 ns) divided by
the prescaler value. The only requirement on T0CKI
high and low time is that they do not violate the mini-
mum pulse width requirement of 10 ns. Refer to param-
eters 40, 41 and 42 in the electrical specification of the
desired device.
7.2.2
Since the prescaler output is synchronized with the
internal clocks, there is a small delay from the time the
external clock edge occurs to the time the Timer0 mod-
ule is actually incremented. Figure 7-5 shows the delay
from the external clock edge to the timer incrementing.
TMR0 INCREMENT DELAY
FIGURE 7-5:
TIMER0 TIMING WITH EXTERNAL CLOCK
Q1
Q2
Q3 Q4
Q1
Q2
Q3 Q4
Q1
Q2
Q3 Q4
Q1
Q2
Q3 Q4
Small pulse
misses sampling
External Clock Input or
Prescaler output
(2)
External Clock/Prescaler
Output after sampling
Increment Timer0 (Q4)
Timer0
T0
T0 + 1
T0 + 2
Note 1: Delay from clock input change to Timer0 increment is 3Tosc to 7Tosc. (Duration of Q = Tosc).
Therefore, the error in measuring the interval between two edges on Timer0 input =
±
4Tosc max.
2: External clock if no prescaler selected, Prescaler output otherwise.
3: The arrows indicate the points in time where sampling occurs.
(3)
(1)
相關PDF資料
PDF描述
12CGQ150 SCHOTTKY RECTIFIER
12CTQ030 12 AMP DUAL SCHOTTKY CENTER TAP RECTIFIERS
12CTQ SCHOTTKY RECTIFIER
12CTQ035-1 SCHOTTKY RECTIFIER
12CTQ035S SCHOTTKY RECTIFIER
相關代理商/技術參數
參數描述
12CEX57E1A 制造商:GE 功能描述:RELAY
12CGQ150 制造商:International Rectifier 功能描述:Diode Schottky 150V 35A 3-Pin(3+Tab) TO-254AA 制造商:International Rectifier 功能描述:SCHOTTKY 150V 35A 3PIN TO-254AA - Bulk 制造商:International Rectifier 功能描述:SCHOTTKY RECTIFIER CMN CTHD 35A TO-254AA; Diode Type:Schottky; Diode Configuration:Dual Common Cathode; Repetitive Reverse Voltage Vrrm Max:150V; Forward Current If(AV):35A; Forward Voltage VF Max:1.6V; No. of Pins:3 ;RoHS Compliant: No
12CGQ150SCS 制造商:International Rectifier 功能描述:Diode Schottky 150V 35A 3-Pin(3+Tab) TO-254AA 制造商:International Rectifier 功能描述:SCHOTTKY 150V 35A 3PIN TO-254AA - Bulk
12CGQ150SCV 制造商:International Rectifier 功能描述:Diode Schottky 150V 35A 3-Pin(3+Tab) TO-254AA 制造商:Unity Microelectronics Inc 功能描述:SCHOTTKY DIODE, HI-REL, QIRL 制造商:International Rectifier 功能描述:SCHOTTKY 150V 35A 3PIN TO-254AA - Bulk
12CGQ150SCX 制造商:International Rectifier 功能描述:SCHOTTKY 150V 35A 3PIN TO-254AA - Bulk