
DRAWING NUMBER
07560
DATE:
March
2010
FOOT GROUND, HEEL, ADJUSTABLE
A.
Outer conductive layer (10^5 RTT)
B.
Inner non-marking neoprene layer
C.
Reinforced with 4.3 oz. polyester mesh scrim layer
D.
.060” thick, 1 ” wide contact area
E.
30” long, 3/8” wide, 8 string black conductive ribbon
F, G. 3/4”, double sided hook and loop material, for quick and easy attachment to
foot.
07560 with 1 megohm resistor
Inner (Rust) Layer
Outside (Black)
Test Method
Layer
Electrical
Characteristics:
Charge Decay
Less than 0.01 sec.
FTMS-1018, Method 4046
Conductivity
8x103 Ohms/sq.
RMA-808
RTG w/1 megohm resistor
1.3x106 Ohms max.
EOS/ESD-S4.1 @ 100V
RTG w/2 megohm resistor
2.3x106 Ohms max.
EOS/ESD-S4.1 @ 100V
RTT
2 x105 Ohms max.
EOS/ESD-S4.1 @ 100V
Specifications:
Abrasion
800 cycles
3000 cycles
ASTM-D3389 Method B
Hardness
70 Shore A
ASTM-D2240
Elongation
600%
400%
ASTM-D412
Tensile
900lbs.
2500lbs.
ASTM-D412
Note:
One heel grounder on each foot is recommended for proper grounding.
Operator is grounded when heel is in contact with grounded dissipative or conductive flooring.
Desco recommends the use of foot ground tester
19252. Ask for Technical Bulletin
TB-2040.For additional information on the use and maintenance of heel grounders please ask for Technical
Meets the requirements of JEDEC-108/9, MIL-HDBK-263A, MIL-STD-1686,DOD-STD-2000.
2010 DESCO INDUSTRIES INC.
Employee Owned
DESCO WEST:3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
Desco.comPHONE (909) 627-8178 FAX (909) 627-7449 FAX REQUEST (909) 627-7126
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
Specifications and procedures subject to change without notice.