- 您現在的位置：買賣IC網 > PDF目錄1977 > XTR114U/2K5 (Texas Instruments)IC 4-20MA I-TRANSMITTER 14-SOIC PDF資料下載
參數資料
| 型號： | XTR114U/2K5 |
| 廠商： | Texas Instruments |
| 文件頁數： | 2/18頁 |
| 文件大小： | 0K |
| 描述： | IC 4-20MA I-TRANSMITTER 14-SOIC |
| 標準包裝： | 2,500 |
| 類型： | 電流發送器 |
| 輸入類型： | 電壓 |
| 輸出類型： | 電壓 |
| 接口： | 2 線 |
| 電流 - 電源： | 20mA |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 14-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 14-SOIC |
| 包裝： | 帶卷 (TR) |
10
XTR112, XTR114
R2 = RTD resistance at maximum measured temperature, T
MAX
where RZ = RTD resistance at the minimum measured temperature, T
MIN
RLIN = 1k (internal)
XTR112 RESISTOR EXAMPLE:
The measurement range is –100
°C to +200°C for a 3-wire Pt100 RTD connection. Determine the values for R
S, RG, RLIN1, and RLIN2. Look up the values
from the chart or calculate the values according to the equations provided.
METHOD 1: TABLE LOOK UP
TMIN = –100°C and T = 300°C (TMAX = +200°C),
Using Table II the 1% values are:
RZ = 604
RLIN1 = 33.2k
RG = 750
RLIN2 = 59k
METHOD 2: CALCULATION
Step 1: Determine RZ, R1, and R2.
RZ is the RTD resistance at the minimum measured temperature, TMIN = –100°C.
Using Equation (1) at right gives RZ = 602.5 (1% value is 604).
R2 is the RTD resistance at the maximum measured temperature, TMAX = 200°C.
Using Equation (2) at right gives R2 = 1758.4.
R1 is the RTD resistance at the midpoint measured temperature,
TMID = (TMIN + TMAX) /2 = (–100 + 200)/2 = 50°C. R1 is NOT the average of RZ and R2.
Using Equation (2) at right gives R1 = 1194.
Step 2: Calculate RG, RLIN1, and RLIN2 using equations above.
RG = 757 (1% value is 750)
RLIN1 = 33.322k (1% value is 33.2k)
RLIN2 = 58.548k (1% value is 59k)
Calculation of Pt1000 Resistance Values
(according to DIN IEC 751)
Equation (1) Temperature range from –200
°C to 0°C:
R(T) = 1000 [1 + 3.90802 10–3 T – 0.5802 10–6 T2
– 4.27350 10–12 (T – 100) T3]
Equation (2) Temperature range from 0
°C to +850°C:
R(T) = 1000 (1 + 3.90802 10–3 T – 0.5802 10–6 T2)
where: R(T) is the resistance in at temperature T.
T is the temperature in
°C.
TABLE I. Summary of Resistor Equations for Two-Wire and Three-Wire Pt1000 RTD Connections.
Table I summarizes the resistor equations for two-wire and
three-wire RTD connections. An example calculation is also
provided. To maintain good accuracy, at least 1% (or better)
resistors should be used for RG. Table II provides standard
1% RG values for a three-wire Pt1000 RTD connection with
linearization for the XTR112. Table III gives RG values for
the XTR114.
LINEARIZATION
RTD temperature sensors are inherently (but predictably)
nonlinear. With the addition of one or two external resistors,
RLIN1 and RLIN2, it is possible to compensate for most of this
nonlinearity resulting in 40:1 improvement in linearity over
the uncompensated output.
General Equations
NOTE: Most RTD manufacturers provide reference tables for
resistance values at various temperatures.
Resistor values for other RTD types (such as Pt2000) can be
calculated using the XTR resistor selection program in the
Applications Section on Burr-Brown’s web site (www.burr-
brown.com)
IREF 2.5 [R1 (R2 + RZ) – 2 (R2RZ)]
(R2 – R1)
=
0.4 RLIN (R2 – R1)
IREF (2R1 – R2 – RZ)
=
IREF 2.5 (R2 – RZ) (R1 – RZ)]
(R2 – R1)
=
0.4 RLIN (R2 – R1)
IREF (2R1 – R2 – RZ)
=
0.4 (RLIN + RG)(R2 – R1)
IREF (2R1 – R2 – RZ)
=
XTR112 (IREF = 0.25)
(see Table II)
RG
RLIN1
RG
RLIN1
RLIN2
THREE-WIRE
TWO-WIRE
0.625 [R1 (R2 + RZ) – 2 (R2RZ)]
(R2 – R1)
=
1.6 RLIN (R2 – R1)
(2R1 – R2 – RZ)
=
0.625 (R2 – RZ) (R1 – RZ)]
(R2 – R1)
=
1.6 RLIN (R2 – R1)
(2R1 – R2 – RZ)
=
1.6 (RLIN + RG)(R2 – R1)
(2R1 – R2 – RZ)
=
0.25 [R1 (R2 + RZ) – 2 (R2RZ)]
(R2 – R1)
=
4 RLIN (R2 – R1)
(2R1 – R2 – RZ)
=
0.25 (R2 – RZ) (R1 – RZ)]
(R2 – R1)
=
4 RLIN (R2 – R1)
(2R1 – R2 – RZ)
=
4 (RLIN + RG)(R2 – R1)
(2R1 – R2 – RZ)
=
XTR114 (IREF = 0.1)
(see Table III)
R1 = RTD resistance at the midpoint measured temperature, T
MID = (TMIN + TMAX)/2
相關PDF資料 |
PDF描述 |
|---|---|
| ZXHF5000JB24TC | IC SWITCH QUAD 2X1 24QFN |
| 3341-56 | IC PLL INTEGER-N 3GHZ 20QFN |
| 3342-56 | IC PLL INTEGER-N 3GHZ 20QFN |
| 534AB000359DG | IC CLK XO QUAD FREQUENCY 8SMD |
| 5P49EE502NDGI | IC CLOCK GENERATOR 20QFN |
相關代理商/技術參數 |
參數描述 |
|---|---|
| XTR114UA | 功能描述:電流靈敏放大器 4-20mA Crnt Trnsmtr w/Sensor Exc & Lin RoHS:否 制造商:Texas Instruments 通道數量: 共模抑制比（最小值）:110 dB 輸入補償電壓:80 uV 電源電壓-最大:5.5 V 電源電壓-最小:2.7 V 電源電流:350 uA 最大工作溫度:+ 125 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-16 封裝:Reel |
| XTR114UA/2K5 | 功能描述:IC 4-20MA I-TRANSMITTER 14-SOIC RoHS:是 類別:集成電路 (IC) >> 接口 - 傳感器和探測器接口 系列:- 其它有關文件:Automotive Product Guide 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:74 系列:- 類型:觸控式傳感器 輸入類型:數字 輸出類型:數字 接口:JTAG，串行 電流 - 電源:100µA 安裝類型:表面貼裝 封裝/外殼:20-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:20-TSSOP 包裝:管件 |
| XTR114UA/2K5E4 | 功能描述:電流靈敏放大器 4-20mA Crnt Trnsmtr w/Sensor Exc & Lin RoHS:否 制造商:Texas Instruments 通道數量: 共模抑制比（最小值）:110 dB 輸入補償電壓:80 uV 電源電壓-最大:5.5 V 電源電壓-最小:2.7 V 電源電流:350 uA 最大工作溫度:+ 125 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-16 封裝:Reel |
| XTR114UAE4 | 功能描述:電流靈敏放大器 4-20mA Crnt Trnsmtr w/Sensor Exc & Lin RoHS:否 制造商:Texas Instruments 通道數量: 共模抑制比（最小值）:110 dB 輸入補償電壓:80 uV 電源電壓-最大:5.5 V 電源電壓-最小:2.7 V 電源電流:350 uA 最大工作溫度:+ 125 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-16 封裝:Reel |
| XTR114UE4 | 功能描述:電流靈敏放大器 4-20mA Crnt Trnsmtr w/Sensor Exc & Lin RoHS:否 制造商:Texas Instruments 通道數量: 共模抑制比（最小值）:110 dB 輸入補償電壓:80 uV 電源電壓-最大:5.5 V 電源電壓-最小:2.7 V 電源電流:350 uA 最大工作溫度:+ 125 C 最小工作溫度:- 40 C 安裝風格:SMD/SMT 封裝 / 箱體:VQFN-16 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。