參數資料
型號： XRT16C854
廠商： Exar Corporation
英文描述： 2.97V TO 5.5V QUAD UART WITH 128-BYTE FIFO
中文描述： 2.97V至5.5V四路UART的128字節FIFO
文件頁數： 27/54頁
文件大?。?/td> 485K
代理商： XRT16C854
xr
REV. 3.0.1
XR16C854/854D
2.97V TO 5.5V QUAD UART WITH 128-BYTE FIFO
27
IER[3]: Modem Status Interrupt Enable
Logic 0 = Disable the modem status register interrupt (default).
Logic 1 = Enable the modem status register interrupt.
IER[4]: Sleep Mode Enable (requires EFR[4] = 1)
Logic 0 = Disable Sleep Mode (default).
Logic 1 = Enable Sleep Mode.
SEE”SLEEP MODE WITH AUTO WAKE-UP” ON PAGE 20.
IER[5]: Xoff Interrupt Enable (requires EFR[4]=1)0
Logic 0 = Disable the software flow control, receive Xoff interrupt (default).
Logic 1 = Enable the software flow control, receive Xoff interrupt. See Software Flow Control section for
details.
IER[6]: RTS# Output Interrupt Enable (requires EFR[4]=1)
Logic 0 = Disable the RTS# interrupt (default).
Logic 1 = Enable the RTS# interrupt. The UART issues an interrupt when the RTS# pin makes a transition
from low to high.
IER[7]: CTS# Input Interrupt Enable (requires EFR[4]=1)
Logic 0 = Disable the CTS# interrupt (default).
Logic 1 = Enable the CTS# interrupt. The UART issues an interrupt when CTS# pin makes a transition from
low to high.
4.4
Interrupt Status Register (ISR) - Read-Only
The UART provides multiple levels of prioritized interrupts to minimize external software interaction. The
Interrupt Status Register (ISR) provides the user with six interrupt status bits. Performing a read cycle on the
ISR will give the user the current highest pending interrupt level to be serviced, others are queued up to be
serviced next. No other interrupts are acknowledged until the pending interrupt is serviced. The Interrupt
Source Table,
Table 10
, shows the data values (bit 0-5) for the interrupt priority levels and the interrupt sources
associated with each of these interrupt levels.
4.4.1
Interrupt Generation:
LSR is by any of the LSR bits 1, 2, 3 and 4.
RXRDY is by RX trigger level.
RXRDY Time-out is by a 4-char plus 12 bits delay timer.
TXRDY is by TX trigger level or TX FIFO empty (or transmitter empty in auto RS-485 control).
MSR is by any of the MSR bits 0, 1, 2 and 3.
Receive Xoff/Special character is by detection of a Xoff or Special character.
CTS# is when its transmitter toggles the input pin (from low to high) during auto CTS flow control.
RTS# is when its receiver toggles the output pin (from low to high) during auto RTS flow control.
4.4.2
LSR interrupt is cleared by a read to the LSR register.
RXRDY interrupt is cleared by reading data until FIFO falls below the trigger level.
RXRDY Time-out interrupt is cleared by reading RHR.
TXRDY interrupt is cleared by a read to the ISR register or writing to THR.
MSR interrupt is cleared by a read to the MSR register.
Xoff interrupt is cleared by a read to ISR or when Xon character(s) is received.
Special character interrupt is cleared by a read to ISR or after the next character is received.
RTS# and CTS# flow control interrupts are cleared by a read to the MSR register.
Interrupt Clearing:
相關PDF資料
PDF描述
XRT16L2552 2.25V TO 5.5V DUART WITH 16-BYTE FIFO
XRT3591 SINGLECHIP V. 35 TRANSCEIVER
XRT3591B SINGLECHIP V. 35 TRANSCEIVER
XRT3591BID SINGLECHIP V. 35 TRANSCEIVER
XRT3591BIP SINGLECHIP V. 35 TRANSCEIVER
相關代理商/技術參數
參數描述
XRT16L2552 制造商:EXAR 制造商全稱:EXAR 功能描述:2.25V TO 5.5V DUART WITH 16-BYTE FIFO
XRT2588CN 制造商:Exar Corporation 功能描述:
XR-T2713CP 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Subscriber Line Metering/Monitoring Circuit
XR-T3588 制造商:EXAR 制造商全稱:EXAR 功能描述:V.35 Interface Receiver/Transmitter
XR-T3588-89ES 制造商:EXAR 制造商全稱:EXAR 功能描述:XR-T3588/89 Evaluation System
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*