參數資料
型號: X24012SMG-3
廠商: IC MICROSYSTEMS SDN BHD
元件分類: DRAM
英文描述: TRIAC,TMG16C60,16A,600V TO-220AB,THRUHOLE NON-ISOLATED
中文描述: 128 X 8 I2C/2-WIRE SERIAL EEPROM, PDSO8
封裝: ROHS COMPLIANT, PLASTIC, SOIC-8
文件頁數: 6/14頁
文件大?。?/td> 284K
代理商: X24012SMG-3
X24012
6
Page Write
The X24012 is capable of an four byte page write
operation. It is initiated in the same manner as the byte
write operation, but instead of terminating the write cycle after
the first data word is transferred, the master can
transmit up to three more words. After the receipt of each word,
the X24012 will respond with an acknowledge.
After the receipt of each word, the two low order address bits
are internally incremented by one. The high order
five bits of the address remain constant. If the master should
transmit more than four words prior to generating
the stop condition, the address counter will “roll over” and the
previously written data will be overwritten. As
with the byte write operation, all inputs are disabled until
completion of the internal write cycle. Refer to Figure 6
for the address, acknowledge and data transfer sequence.
Acknowledge Polling
The disabling of the inputs, during the internal write
operation, can be used to take advantage of the typical
5 ms write cycle time. Once the stop condition is issued to
indicate the end of the host’s write operation the
X24012 initiates the internal write cycle. ACK polling can be
initiated immediately. This involves issuing the start
condition followed by the slave address for a write
operation. If the X24012 is still busy with the write
operation no ACK will be returned. If the X24012 has
completed the write operation an ACK will be returned
and the master can then proceed with the next read or write
operation (See Flow 1).
READ OPERATIONS
Read operations are initiated in the same manner as write
operations with the exception that the R/W bit of the
slave address is set to a one. There are three basic read
operations: current address read, random read and
sequential read.
It should be noted that the ninth clock cycle of the read
operation is not a “don’t care.” To terminate a read
operation, the master must either issue a stop condition
during the ninth cycle or hold SDA HIGH during the ninth
clock cycle and then issue a stop condition
.
Flow 1. ACK Polling Sequence
3847 FHD F11
WRITE OPERATION
COMPLETED
ENTER ACK POLLING
ISSUE
START
ISSUE SLAVE
ADDRESS AND R/W = 0
ACK
RETURNED
NEXT
OPERATION
A WRITE
ISSUE BYTE
ADDRESS
PROCEED
ISSUE STOP
NO
YES
YES
PROCEED
ISSUE STOP
NO
相關PDF資料
PDF描述
X24165GG TRIAC,TMG2DQ60D,2A,600V,TO-252 D PACK,SMD (TJ=150 OCTRIAC)
X24165F TRIAC,TMG16D80F,16A,800V TO-220F,THRUHOLE ISOLATED
X24165FG TRIAC,TMG20C60F,20A,600V TO-220F,THRUHOLE NON-ISOLATED
X24165FP TRIAC,TMG2CQ60D,3A,600V,TO-252 D PACK,SMD (TJ=150 OCTRIAC)
X24165FV TRIAC,TMG2D60D,2A,600V,T0-252 D PACK,SMD SENSITIVE GATE
相關代理商/技術參數
參數描述
X24-019-DK 功能描述:射頻開發工具 2.4 GHz - Xstream 19200 BAUD RoHS:否 制造商:Taiyo Yuden 產品:Wireless Modules 類型:Wireless Audio 工具用于評估:WYSAAVDX7 頻率: 工作電源電壓:3.4 V to 5.5 V
X24-019-DK-INT 制造商:Digi International 功能描述:XSTREAM DEVELOPMENT KIT, 2.4GHZ, 50MW, 19.2 KBAUD, 3" WIRE - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT DEV XSTREAM 2.4GHZ RPSMA 制造商:Digi International Inc 功能描述:Xstream Dev Kit 制造商:Digi International 功能描述:Xstream 2.4GHz Modem Dev kit 19.2 Kbaud
X24-019NMC 功能描述:射頻模塊 2.4 GHz - Xsstream 19200 BAUD RoHS:否 制造商:Linx Technologies 產品:Transceiver Modules 頻帶:902 MHz to 928 MHz 輸出功率:- 15.5 dBm to + 12.5 dBm 接口類型:UART 工作電源電壓:- 0.3 VDC to + 5.5 VDC 傳輸供電電流:38.1 mA 接收供電電流:22.7 mA 天線連接器類型:U.FL 最大工作溫度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm
X24-019NMI 功能描述:射頻模塊 24XStream 50mW tran r w/MMCX 19200 bps RoHS:否 制造商:Linx Technologies 產品:Transceiver Modules 頻帶:902 MHz to 928 MHz 輸出功率:- 15.5 dBm to + 12.5 dBm 接口類型:UART 工作電源電壓:- 0.3 VDC to + 5.5 VDC 傳輸供電電流:38.1 mA 接收供電電流:22.7 mA 天線連接器類型:U.FL 最大工作溫度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm
X24-019NMT 功能描述:射頻模塊 24XStream 50mW tran r w/MMCX 19200 bps RoHS:否 制造商:Linx Technologies 產品:Transceiver Modules 頻帶:902 MHz to 928 MHz 輸出功率:- 15.5 dBm to + 12.5 dBm 接口類型:UART 工作電源電壓:- 0.3 VDC to + 5.5 VDC 傳輸供電電流:38.1 mA 接收供電電流:22.7 mA 天線連接器類型:U.FL 最大工作溫度:+ 85 C 尺寸:1.15 mm x 0.63 mm x 0.131 mm