- 您現在的位置：買賣IC網 > PDF目錄200642 > UPD23C64040LGY-XXX-MJH x8 or x16 ROM (Mask Programmable) PDF資料下載
參數資料
| 型號： | UPD23C64040LGY-XXX-MJH |
| 英文描述： | x8 or x16 ROM (Mask Programmable) |
| 中文描述： | x8或x16光盤（掩?？删幊蹋?/td> |
| 文件頁數： | 7/16頁 |
| 文件大?。?/td> | 151K |
| 代理商： | UPD23C64040LGY-XXX-MJH |
15
PD23C128000L
Data Sheet M13644EJ3V0DS00
NOTES FOR CMOS DEVICES
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note:
Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity
as much as possible, and quickly dissipate it once, when it has occurred. Environmental control
must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using
insulators that easily build static electricity. Semiconductor devices must be stored and transported
in an anti-static container, static shielding bag or conductive material. All test and measurement
tools including work bench and floor should be grounded. The operator should be grounded using
wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need
to be taken for PW boards with semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note:
No connection for CMOS device inputs can be cause of malfunction. If no connection is provided
to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence
causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels
of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to VDD or GND with a resistor, if it is considered to have a possibility of
being an output pin. All handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note:
Power-on does not necessarily define initial status of MOS device. Production process of MOS
does not define the initial operation status of the device. Immediately after the power source is
turned ON, the devices with reset function have not yet been initialized. Hence, power-on does
not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after power-on for devices
having reset function.
相關PDF資料 |
PDF描述 |
|---|---|
| UPD23C64040LGY-XXX-MKH | x8 or x16 ROM (Mask Programmable) |
| UPD23C64202LG5-XXX-9JH | x16 or x32 ROM (Mask Programmable) |
| UPD23C8000CZ | x8 or x16 ROM (Mask Programmable) |
| UPD23C8000LCZ-XXX | SCR / Diode Modules up to 1400V Diode / SCR Phase Control |
| UPD23C8001EGW | x8 ROM (Mask Programmable) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| UPD23C64040LGY-XXX-MKH | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:x8 or x16 ROM (Mask Programmable) |
| UPD23C64080JL | 制造商:NEC 制造商全稱:NEC 功能描述:64M-BIT MASK-PROGRAMMABLE ROM 8M-WORD BY 8-BIT (BYTE MODE) / 4M-WORD BY 16-BIT (WORD MODE) PAGE ACCESS MODE |
| UPD23C64080JLGX-XXX | 制造商:NEC 制造商全稱:NEC 功能描述:64M-BIT MASK-PROGRAMMABLE ROM 8M-WORD BY 8-BIT (BYTE MODE) / 4M-WORD BY 16-BIT (WORD MODE) PAGE ACCESS MODE |
| UPD23C64080JLGY-XXX-MJH | 制造商:NEC 制造商全稱:NEC 功能描述:64M-BIT MASK-PROGRAMMABLE ROM 8M-WORD BY 8-BIT (BYTE MODE) / 4M-WORD BY 16-BIT (WORD MODE) PAGE ACCESS MODE |
| UPD23C64080JLGY-XXX-MKH | 制造商:NEC 制造商全稱:NEC 功能描述:64M-BIT MASK-PROGRAMMABLE ROM 8M-WORD BY 8-BIT (BYTE MODE) / 4M-WORD BY 16-BIT (WORD MODE) PAGE ACCESS MODE |
發布緊急采購，3分鐘左右您將得到回復。